ttamamusually replies in minutes11:42
pinnedprice band AED 150–600duration 1–3 hourscovers Al Aweeremirate Dubai
need wiring repair in al aweer — today if possible11:42✓✓
There are plenty of ways to arrange electrician in Al Aweer. The one that wastes least of your day is comparing verified vendors in one place and booking the slot that fits.11:43
typical ranges vendors quote around al aweer —Call-out with fault diagnosis (tripping breaker, dead circuit)AED 150–250Socket or switch replacement, per pointAED 150–250New socket point as a spur on an existing circuitAED 180–35011:44
that works. who actually turns up?11:45✓✓
licensed vendors only — the licence and vendor ID land in this chat before anyone rings your bell.11:46
Start at the DB board: what a trip is actually telling you
Every UAE home has a distribution board (DB), usually a grey or white panel near the entrance or in the corridor. Inside sit a main isolator, one or more RCDs (residual current devices, the wide switches with a test button) and a row of MCBs, the small breakers that each protect one circuit: kitchen sockets, bedroom sockets, lighting, the water heaters, the AC units. When something trips, which switch went down tells you most of the story before anyone picks up a phone.
UAE boards have a few local quirks worth knowing before trouble starts. Water heaters usually have their own switches, sometimes on the board and sometimes on the bathroom wall, and each split AC unit typically has a dedicated isolator. Older flats often carry a second small board for the heaters alone. Ten minutes spent flipping breakers one by one and writing what each controls on the board's door turns your next fault call from a vague description into a precise one, and shortens the electrician's paid diagnosis time accordingly.
Budgeting for this
There is no single correct price for wiring repair — there is a range, and where you land in it depends on scope and which vendor you pick. The app shows you that range up front.
Call-out with fault diagnosis (tripping breaker, dead circuit)AED 150–250
Socket or switch replacement, per pointAED 150–250
New socket point as a spur on an existing circuitAED 180–350
Light fixture or ceiling fan installation, standard ceilingAED 150–350
Villa landscape lighting repair visitAED 250–550
Final pricing comes from the vendor option you pick in the app — you see the quotes before you commit.
Frequently asked questions
Do I have to pay for electrical repairs in my rented apartment?
Check your tenancy contract for a minor-maintenance clause; the common UAE arrangement makes tenants responsible for small repairs up to a stated amount per incident, with the landlord covering wear-and-tear and anything structural. An aging water heater leaking to earth is wear, not misuse, so document faults with photos and dates before agreeing to pay.
What is an RCD, and why does mine trip when the washing machine runs?
An RCD cuts power within milliseconds when current leaks to earth, which is what stops a faulty appliance from electrocuting someone. Washing machines trip it when their heating element's insulation degrades, a very common failure in the UAE's hard water conditions. The fix is repairing or replacing the appliance, never swapping the RCD for a less sensitive one.
Can electricians work evenings or weekends in apartment towers?
Emergency fault attendance is generally allowed at any hour, but planned noisy work like drilling is restricted by most building managements to weekday daytime slots, commonly somewhere between 8am and 6pm. Quiet work such as fixture swaps or DB diagnosis is often fine in the evening. Confirm your building's rules before booking a time you cannot use.
How do I know the electrician I am booking is actually qualified?
Legitimate operators work under a licensed company rather than as anonymous freelancers, and for regulated work they should name their utility approval without being pressed. Booking through tamam adds a layer, since listed vendors are verified and the job, payment and history are recorded in the app, which also makes it easy to rebook the same technician who already knows your board.
Is it worth adding RCD protection to an older building's board?
Yes, and it is one of the cheapest safety upgrades available. Many pre-2000s buildings in Deira, Ajman and UAQ still have boards with MCBs only, meaning nothing detects earth leakage from a failing heater or damaged cable. Adding RCD protection is a board-level job, so use a properly licensed electrician and expect a short power shutdown during the work.
Do you cover Al Aweer?
Yes — Al Aweer is covered across Dubai, with vendors who regularly work the area. Availability shows live in the app.
What goes wrong
Buying the appliance or fixture before checking the ceiling or the board
The induction hob that needs a dedicated circuit your DB cannot spare, the chandelier your gypsum ceiling cannot carry, the dimmer your LED lamps do not support: all cheaper to discover before purchase. A short survey visit or even photos sent ahead prevents owning hardware you cannot install.
Booking tower work without checking permit rules first
Many managed buildings turn contractors away without a work permit or landlord NOC, and some restrict noisy work to weekday hours. The result is a paid visit that ends in the lobby. One message to building management before you pick a slot avoids the wasted call-out.
Treating outdoor electrics like indoor electrics
Indoor-grade junction boxes in flowerbeds, unrated extension cords feeding garden lights and balcony sockets without covers all fail the same way: moisture gets in, the RCD starts tripping, and the search for the wet joint costs more than proper IP-rated fittings would have. Outdoors, specification is the economy.