Residents across Al Nahyan book handyman through tamam because the model is simple — licensed vendors, transparent pricing, in-app tracking, and the same provider again next time if you liked them.
Download the appBook on WhatsAppBecause Al Nahyan is primarily residential, so most bookings are villa or apartment work and timing follows family routines, the practical details differ from other parts of Abu Dhabi: how a vendor gets in, where they park, and which hours actually work.
Vendor availability is steady and lead times are typically short. Typical on-site time is 1–3 hours. Vendors will flag it in advance if your job looks heavier than standard.
Brackets fixed into block or gypsum walls with cables managed.
If you would rather not use the app, message tamam on whatsapp and a coordinator will arrange a vetted vendor in Al Nahyan for you.
A well-run handyman visit has a fixed rhythm, and once you know it you can spot a professional inside five minutes. The visit starts with a walk-through: the technician looks at every job on your list before opening a toolbox, because the order of work matters. Dusty jobs (drilling into block) come before clean jobs (assembling furniture), and anything with a cure time (silicone) gets done early so the clock runs while other work continues. A pro will also tap-test your walls during this walk-through, because in the UAE the wall type decides the method for almost everything.
The work itself follows the sequence agreed, and the visit ends with a walkthrough in reverse: every fixing gets a firm pull test, levels go back on the shelves and frames, offcuts and packaging leave with the technician, and you check each item against your original list. Most call-outs in the UAE carry a minimum charge, typically AED 100-200, which usually covers arrival and the first block of labour. That minimum is exactly why batching several small jobs into one visit is the single best money decision in this trade, more on that below.
Curtain work is 80 percent measurement and 20 percent drilling, and the mistakes all happen in the first part. The technician has to establish three things before a single hole is made: whether the fixing is face-fix (into the wall above the window), ceiling-fix (up into the slab), or inside the recess; whether the ceiling at that point is actual concrete slab or a suspended gypsum ceiling with a void above it; and how much the finished curtains will weigh. A double track carrying blackout plus sheer across a three-metre villa window is a genuinely heavy, constantly moving load, and it needs brackets every 60-80 centimetres, not just one at each end.
Ceiling-fix into a suspended gypsum ceiling is the classic trap. Screws into the board alone will hold for a few weeks of gentle use and then let go, usually at 6am when someone yanks the blackout open. The correct approaches are either longer fixings that pass through the void into the concrete slab above, or rated hollow-ceiling anchors with the load spread across extra brackets. Ask your technician which one they are using; the answer tells you a lot.
The surface then has to be genuinely dry, not towel-dry but dry-dry, which in a family bathroom means the shower is out of use for a few hours before the work, worth knowing when you schedule the visit. The pro then masks both sides of the joint with tape, guns a sanitary-grade anti-fungal silicone (not general-purpose acrylic, which is cheaper and fails fast in wet areas), tools the bead smooth in one pass, and pulls the tape while the bead is wet, leaving those crisp straight edges that separate professional work from a DIY afternoon.
Then comes the part no one budgets for: cure time. Sanitary silicone needs roughly 24 hours before the shower runs again; using it the same evening washes out the surface skin and the bead fails early. A full shower enclosure reseal is 60-90 minutes of work plus that day of patience. Quality check a week later: the bead is uniform width, bonded on both edges with no lifting corners, and water sheets off it rather than creeping underneath.
Vendors who let their licence or insurance lapse come off the platform. Staying listed requires keeping both current.
The honest answer on cost is a range, not a figure. For tv mounting the typical band is AED 100–500, and you see each vendor's position in it before committing.
As a rough guide for tv mounting: standard call-out including first hour of labour around AED 100–200; tv mounting up to 65 inches (bracket supplied by customer) around AED 150–350; curtain rail or blind installation, per window around AED 100–250.
Treat these as guide bands. The vendor you select confirms the exact price in-app before the job begins.
Every visit carries the call-out minimum, so three single-job bookings can cost more than one half-day visit that clears ten jobs. Keep a running list on your phone and book when it reaches three or four items. Vendors also quote batched work more competitively because their travel time is spread across more billable tasks.
New silicone does not bond to old silicone, and mould trapped underneath grows straight through the fresh bead. If the technician is not spending most of the job on removal and drying, the reseal will fail within months. Ask to see the joint clean and dry before the new bead goes in.
In permit-controlled towers, a technician stopped at security is a wasted visit that you may still be charged for. Five minutes with building management before booking, asking about NOCs, service-lift rules and drilling hours, protects both your slot and your deposit with the building.
Tools, yes, always: drills, levels, anchors and consumables like screws and basic plugs are part of the service. Specific hardware is different: TV brackets, curtain rails, mirrors, shelves and replacement hinges are normally customer-supplied unless the quote says otherwise. Confirm the split when you accept the quote so nobody is standing in a hardware store mid-visit.
Only at fixture level: swapping a light fitting, changing a tap washer, fitting an appliance. New wiring, new power points, anything at the distribution board, or work on supply pipework needs a licensed electrician or plumber under DEWA, SEWA or ADDC and municipality rules. A good handyman will tell you where that line is rather than crossing it.
Yes, if it is fixed correctly. Light frames go on plasterboard anchors, but a heavy mirror needs to land on the metal studs behind the board or use rated cavity fixings across multiple points. If the technician cannot tell you which method they are using and why, pause the drilling.
Roughly 24 hours. Sanitary silicone skins quickly but needs a full day to cure; running the shower the same evening washes out the bead and shortens its life dramatically. Book the reseal for a morning and plan around the guest bathroom that day.
Most vendors work Saturdays and many work Sundays, which suits commuting households, but tower rules can override this: plenty of buildings ban drilling on weekends or after 6pm. Quiet jobs, assembly, silicone, door adjustment, are usually fine any day. Check your building's noisy-work hours before booking a weekend slot.
Al Nahyan is within our Abu Dhabi coverage. Open the app to see which vendors have slots near you today.
tv mounting elsewhere in abu dhabi
more handyman in al nahyan
other home services in al nahyan
Licensed vendors, transparent AED ranges, and the same provider again next time if you liked them.
Download the appBook on WhatsApp