tamam covers Remraam for handyman the same way it covers every UAE community: multiple vetted vendors, AED ranges you can see up front, and booking that takes a couple of taps.
Download the appBook on WhatsAppRemraam sits within Dubai, and local conditions do influence handyman: access procedures, building rules and seasonal demand all shift how a booking should be planned.
Vendor availability is steady and lead times are typically short. Budget roughly 1–3 hours on site for shelf installation, plus a little for access if the building has a lift protocol.
Floating and bracketed shelving anchored for real loads.
If you would rather not use the app, message tamam on whatsapp and a coordinator will arrange a vetted vendor in Remraam for you.
The honest answer on cost is a range, not a figure. For shelf installation the typical band is AED 100–500, and you see each vendor's position in it before committing.
| scope | typical range |
|---|---|
| Standard call-out including first hour of labour | AED 100–200 |
| Curtain rail or blind installation, per window | AED 100–250 |
| Flat-pack assembly, standard bed or chest of drawers | AED 150–300 |
Nothing is charged until you have chosen a vendor and seen their number. There are no surprise call-out fees.
Curtain work is 80 percent measurement and 20 percent drilling, and the mistakes all happen in the first part. The technician has to establish three things before a single hole is made: whether the fixing is face-fix (into the wall above the window), ceiling-fix (up into the slab), or inside the recess; whether the ceiling at that point is actual concrete slab or a suspended gypsum ceiling with a void above it; and how much the finished curtains will weigh. A double track carrying blackout plus sheer across a three-metre villa window is a genuinely heavy, constantly moving load, and it needs brackets every 60-80 centimetres, not just one at each end.
Ceiling-fix into a suspended gypsum ceiling is the classic trap. Screws into the board alone will hold for a few weeks of gentle use and then let go, usually at 6am when someone yanks the blackout open. The correct approaches are either longer fixings that pass through the void into the concrete slab above, or rated hollow-ceiling anchors with the load spread across extra brackets. Ask your technician which one they are using; the answer tells you a lot.
Every hanging job starts with the same question: what is this wall? Gypsum partition takes self-drive plasterboard anchors happily for light frames, up to roughly five kilograms per point, and spring toggles or metal cavity anchors for heavier pieces; anything genuinely heavy, a large mirror, a floating shelf meant to carry books, should land on the metal studs. Solid block or concrete takes standard nylon plugs and holds almost anything, the only cost being a hammer drill and some dust management.
For gallery walls and multi-frame layouts, watch for the laser line. A cross-line laser plus paper templates taped up for approval before drilling turns a two-hour trial-and-error session into forty minutes with zero spare holes. Good finish standard: frames level and aligned to the laser, no cracked plaster around fixing points, and every anchor flush, not proud of the wall.
If you have just taken handover of a new apartment or villa, you have two overlapping jobs and they should not be confused. Defects that are the developer's responsibility, cracked tiles, failed grout, misaligned kitchen doors, paint defects, belong on the official snag report inside the defects liability period, typically twelve months from handover in the UAE. Fixing those yourself, or having a handyman fix them, can muddy your claim, so document first: photograph everything, log it with the developer or their facilities company, and let their contractor close what they are obliged to close.
The handyman's list is everything the developer never owed you: mounting TVs and mirrors, curtain tracks in every room, wardrobe extras, child locks, shelf installation, appliance levelling, door stoppers before the first wall dent, and the dozens of small adjustments that turn a bare unit into a working home. The professional way to run this is room by room with a written list, exactly as a site foreman walks a punch list: start at the front door, work clockwise, note wall types as you go, and group the jobs by tool so the technician drills everything in one dusty phase rather than unpacking the hammer drill four times.
Every visit carries the call-out minimum, so three single-job bookings can cost more than one half-day visit that clears ten jobs. Keep a running list on your phone and book when it reaches three or four items. Vendors also quote batched work more competitively because their travel time is spread across more billable tasks.
New silicone does not bond to old silicone, and mould trapped underneath grows straight through the fresh bead. If the technician is not spending most of the job on removal and drying, the reseal will fail within months. Ask to see the joint clean and dry before the new bead goes in.
Cracked tiles, failed grout and misaligned kitchen units in a new handover are usually the developer's obligation during the defects liability period. Paying a handyman to fix them both costs you money and can undermine the official snag claim. Document and report first; hire for the jobs the developer never owed you.
Anyone who arrives at your door came through a check: registered business, current insurance, named technician. That is the baseline, not an upgrade.
Tools, yes, always: drills, levels, anchors and consumables like screws and basic plugs are part of the service. Specific hardware is different: TV brackets, curtain rails, mirrors, shelves and replacement hinges are normally customer-supplied unless the quote says otherwise. Confirm the split when you accept the quote so nobody is standing in a hardware store mid-visit.
Yes, if it is fixed correctly. Light frames go on plasterboard anchors, but a heavy mirror needs to land on the metal studs behind the board or use rated cavity fixings across multiple points. If the technician cannot tell you which method they are using and why, pause the drilling.
In many Dubai and Abu Dhabi towers and masterplanned communities, yes: management requires a work permit or NOC, and often restricts noisy work to set weekday hours. Villas and most older buildings need nothing formal beyond a word with the watchman. Check with your building before booking, because a technician turned away at security still counts as a visit.
Roughly 24 hours. Sanitary silicone skins quickly but needs a full day to cure; running the shower the same evening washes out the bead and shortens its life dramatically. Book the reseal for a morning and plan around the guest bathroom that day.
In Dubai, Sharjah and Abu Dhabi, next-day slots are usually realistic and same-day is possible for simple jobs. In RAK, Fujairah and UAQ, where many teams travel from other emirates, one to two days ahead is safer. Move-in season, September and the weeks around school start, tightens availability everywhere.
We cover Remraam and the surrounding Dubai communities. Message on whatsapp if you want a specific time confirmed first.
shelf installation elsewhere in dubai
more handyman in remraam
other home services in remraam
Free to download, free to browse. You only pay when you book a job.
Download the appMessage on WhatsApp