tamam connects Arjan households and businesses with vetted handyman providers. You see the options, the AED range and the availability, then book directly.
Download the appBook on WhatsAppIn Arjan, the difference between a smooth handyman visit and a wasted afternoon usually comes down to whether the vendor has worked the area before.
Vendor availability is steady and lead times are typically short. Typical on-site time is 1–3 hours. Vendors will flag it in advance if your job looks heavier than standard.
Floating and bracketed shelving anchored for real loads.
shelf installation generally falls in the AED 100–500 band. Comparing several verified vendors on the same job description is what stops you overpaying.
| scope | typical range |
|---|---|
| Curtain rail or blind installation, per window | AED 100–250 |
| Flat-pack assembly, standard bed or chest of drawers | AED 150–300 |
| Large wardrobe assembly with anti-tip anchoring | AED 250–500 |
Treat these as guide bands. The vendor you select confirms the exact price in-app before the job begins.
A well-run handyman visit has a fixed rhythm, and once you know it you can spot a professional inside five minutes. The visit starts with a walk-through: the technician looks at every job on your list before opening a toolbox, because the order of work matters. Dusty jobs (drilling into block) come before clean jobs (assembling furniture), and anything with a cure time (silicone) gets done early so the clock runs while other work continues. A pro will also tap-test your walls during this walk-through, because in the UAE the wall type decides the method for almost everything.
Next comes scope confirmation. The technician restates what will be done, what materials are needed, and whether anything on your list is actually outside a handyman's lane, wiring a new power point, for example, belongs to a licensed electrician under DEWA and municipality rules, and a good handyman says so rather than improvising. Then protection goes down: drop sheets under drilling points, and ideally a vacuum or dust catcher held at the drill hole, because red block dust stains light grout and carpet.
Most TV-mounting advice online is written for North American timber-frame houses. UAE apartments and villas are built differently: exterior and structural walls are concrete block or poured concrete finished with plaster, while many internal partitions, especially in towers built after roughly 2005, are gypsum board on light-gauge metal studs. A timber stud finder is useless here. The professional method is a knock test first (block sounds dead, gypsum sounds hollow), then a magnet or metal-stud detector to map the studs at their usual 400 or 600 millimetre spacing.
Good workmanship shows in the details you can check yourself: the TV sits level (put a spirit-level app on the top edge), cables run through a trunking channel or in-wall conduit rather than dangling, the mount's locking screws are fitted so the panel cannot be lifted off by a curious child, and the technician does a firm downward pull on the bracket before hanging the screen. Budget 60-90 minutes if cable concealment or a soundbar is involved.
Every job in this guide has an objective pass test, and the time to apply it is while the technician is still in your home. Pull firmly on every bracket, rail and mount, a proper fixing does not move at all, and a professional will do this pull test in front of you without being asked. Sight along rails and frames or ask for the laser to be held up one last time. Open and close every adjusted door at normal speed. Run a finger along silicone lines to check the edges are bonded (gently, and only if the bead has skinned). Count the holes: there should be exactly as many as there are fixings, and any abandoned holes should have been filled before the tools were packed.
Then look down. Dust and packaging are part of the job, not your problem after it: block-drilling dust vacuumed rather than swept into grout lines, cardboard and offcuts removed, protective film peeled off new hardware. Take photos of the finished work while everything is fresh, they are useful if anything settles or loosens in the first weeks.
Not everything fits neatly into an app form. For anything custom in Arjan, whatsapp a coordinator and it gets handled manually.
Every vendor on tamam has a verified trade licence with the relevant municipality, checked insurance, and technicians who are ID-tagged in the app.
New silicone does not bond to old silicone, and mould trapped underneath grows straight through the fresh bead. If the technician is not spending most of the job on removal and drying, the reseal will fail within months. Ask to see the joint clean and dry before the new bead goes in.
In permit-controlled towers, a technician stopped at security is a wasted visit that you may still be charged for. Five minutes with building management before booking, asking about NOCs, service-lift rules and drilling hours, protects both your slot and your deposit with the building.
The cheapest quote often prices a different job: silicone over silicone, plugs instead of proper anchors, no anti-tip strap on the wardrobe. When quotes differ widely, ask each vendor how they will do the job. The one who mentions wall type, anchors and cure times without prompting is usually the one worth paying.
Tools, yes, always: drills, levels, anchors and consumables like screws and basic plugs are part of the service. Specific hardware is different: TV brackets, curtain rails, mirrors, shelves and replacement hinges are normally customer-supplied unless the quote says otherwise. Confirm the split when you accept the quote so nobody is standing in a hardware store mid-visit.
In many Dubai and Abu Dhabi towers and masterplanned communities, yes: management requires a work permit or NOC, and often restricts noisy work to set weekday hours. Villas and most older buildings need nothing formal beyond a word with the watchman. Check with your building before booking, because a technician turned away at security still counts as a visit.
In Dubai, Sharjah and Abu Dhabi, next-day slots are usually realistic and same-day is possible for simple jobs. In RAK, Fujairah and UAQ, where many teams travel from other emirates, one to two days ahead is safer. Move-in season, September and the weeks around school start, tightens availability everywhere.
It depends on whether the scope changed. If you added tasks on the day, expect the price to move, agree the addition before the extra work starts. If the scope is unchanged and the technician simply underestimated, a fixed quote should hold, which is one reason to get quotes against a full photo-documented list rather than a vague description.
They can, but often should not, yet. Genuine construction defects belong on the developer's snag list inside the defects liability period, usually twelve months, and fixing them privately can weaken your claim. Document defects with the developer first, then use a handyman for everything the developer never owed you: mounting, rails, assembly and the move-in list.
We cover Arjan and the surrounding Dubai communities. Message on whatsapp if you want a specific time confirmed first.
shelf installation elsewhere in dubai
more handyman in arjan
other home services in arjan
Vendors covering Arjan with transparent pricing and live availability.
Open in the appMessage on WhatsApp