scratch removal in stella maris.sorted in one chat.

tamam car car polishingscratch removal in stella maristoday · dubai

tamamusually replies in minutes11:00

pinnedtypical AED 200–900on site 2–5 hoursarea Stella Marisbooking app · whatsapp

need scratch removal in stella maris — today if possible11:00

tamam connects Stella Maris households and businesses with vetted car polishing providers. You see the options, the AED range and the availability, then book directly.11:01

typical ranges vendors quote around stella maris —Single-stage machine polish, sedanAED 200–400Single-stage machine polish, SUV or 4x4AED 300–500Two- to three-stage correction, SUV or 4x4AED 600–90011:02

that works. who actually turns up?11:03

licensed vendors only — the licence and vendor ID land in this chat before anyone rings your bell.11:04

type what you need …

going rate AED 200–900 · 2–5 hours on siteGet the tamam app →

Booking scratch removal around Stella Maris

Vendors covering Stella Maris tend to have prior jobs in the area, which matters more than it sounds — tower clearance, gate access and lift bookings are where visits usually lose time.

Demand here is high, so slots move quickly — booking a day ahead usually gets you the window you actually want. Budget roughly 2–5 hours on site for scratch removal, plus a little for access if the building has a lift protocol.

Light scratches refined away where possible.

How vendors are checked

Vendors are licence-checked and insurance-verified before they take a single booking, and customer ratings stay attached to their profile afterwards.

licence checkedvendor id shared in chatpay when it’s booked686 communities · 7 emirates

What 'polishing' actually means — and what you are really paying for

This matters because the UAE market uses the word 'polish' loosely. Some vendors quote a 'polish' that is actually a wax or glaze pass — a hand-applied product that fills and hides scratches for two or three washes, then disappears — while a genuine machine polish physically removes the defect. They are different jobs at different prices, and you should know which one you are buying before comparing quotes.

Understand too that clear coat is a finite budget: factory paint tolerates only a handful of proper corrections over a car's life. A good polisher measures thickness before cutting and removes the minimum needed; a bad one grinds at maximum cut every visit until the colour coat strikes through on a door edge. A vendor who mentions paint depth readings unprompted understands the material.

Headlight restoration: the small job that gets cars through inspection

UAE sunlight destroys headlight lenses. The lenses are polycarbonate with a factory UV coating, and years of intense sun bake that coating into a yellow, hazed crust that scatters light. Beyond looking tired, hazed lenses cut night visibility dramatically and can get flagged at the annual registration renewal test at inspection centres, where lamp condition and light output are checked. It is one of the cheapest failure points to fix in advance.

The restoration process is miniature paint correction. The technician masks the surrounding paint, then wet-sands the lens through progressively finer grits — typically 800 to 1500 to 3000 — removing the dead UV layer entirely. At this point the lens looks uniformly frosted, which alarms customers who have not seen the process before. Machine polishing with a plastic-specific compound then brings it back to full clarity. The whole job runs 30–60 minutes for the pair and typically costs AED 150–300 in this market.

Aftercare in a dusty climate: protecting the work you just paid for

The fastest way to destroy a fresh polish is the way most UAE cars get 'cleaned' every day: a dry cloth or feather duster dragged across dusty paint. Desert dust is largely silica, harder than your clear coat, and every dry wipe grinds it in. The swirl marks you just paid to remove came from exactly this. Politely decline the courtesy dusting at car parks and petrol stations, and if you use a building's car wash service, ask them to use plenty of water and a clean mitt rather than a recycled cloth.

Between polishes, the maintenance loop is short: a gentle two-bucket or touchless wash weekly or fortnightly, a sealant top-up every two to three months because UV here eats wax quickly, and shaded parking where possible. Outdoor-parked cars need correction noticeably more often than garage-kept ones, and dark colours show the difference first — a recurring mobile wash from careful hands keeps the finish honest between corrections.

What you should expect to pay

Rather than publishing one rate, tamam shows what multiple verified vendors charge for scratch removal so you can pick the tier that fits the job and the budget.

Single-stage machine polish, sedanAED 200–400

Single-stage machine polish, SUV or 4x4AED 300–500

Two- to three-stage correction, SUV or 4x4AED 600–900

Headlight restoration with UV sealant, pairAED 150–300

Hand glaze and wax finish (no correction)AED 200–350

These bands reflect typical jobs. Unusual scope gets quoted individually, still before you commit.

Booking, step by step

01pick the job type

02drop your Stella Maris location and preferred day

03scan the AED ranges side by side

04book the slot that works

05follow arrival live

Frequently asked questions

What is the difference between polishing and waxing?

Polishing is abrasive: it removes a thin layer of clear coat to physically eliminate swirls and light scratches. Waxing is additive: it lays a protective, glossy layer on top of the paint without fixing anything underneath. A proper job usually does both, in that order — correct first, protect second.

Does polishing damage the paint?

Done correctly, it removes only a few microns of clear coat and leaves the paint healthier-looking and easier to protect. The risk comes from repeated aggressive cutting, rotary work near edges, or polishing paint that is already thin — which is why depth readings before heavy correction matter. Ask your vendor how much cut the job needs and why.

Can polishing remove deep scratches?

The fingernail test is the honest answer: if your nail catches in the scratch, it has gone through or nearly through the clear coat, and polishing can only soften its appearance, not remove it. Scratches that do not catch a nail usually polish out fully. Anything deeper needs touch-up paint or a respray of the panel.

Will a hazed headlight fail my registration inspection?

Lamp condition and light output are checked at renewal inspection, and badly yellowed or hazed lenses are a common reason cars get flagged. Restoration is a 30–60 minute job for the pair, typically AED 150–300, and is worth doing shortly before your inspection date. Make sure the vendor applies a UV sealant afterwards or the haze returns within months.

Should I polish before getting a ceramic coating?

Yes, and any coating installer worth hiring will insist on it. The coating locks in whatever is underneath it, swirls included, for years. The standard sequence is decontamination, machine polish to the level of correction you want, a panel wipe to remove polishing oils, then the coating. Skipping correction to save money defeats the point of coating.

Do you cover Stella Maris?

Yes — Stella Maris is covered across Dubai, with vendors who regularly work the area. Availability shows live in the app.

Get this right first

Photograph your paint in direct sunlight and share the pictures when requesting quotes, so vendors price your actual condition.
Declare any resprayed panels, wraps, PPF or ceramic coating up front — each one changes the job plan.
Confirm the stage count, whether claying and iron decontamination are included, and what protection is applied at the end.
Arrange shade, access and (if possible) a power point; clear it with building security for tower parking.
At handover, inspect horizontal panels under sun or a low-angle torch for holograms and leftover swirls before closing the job.

What goes wrong

Judging the finish indoors at handover

Shaded podium parking hides holograms and remaining swirls almost perfectly. Insist on seeing the car in direct sunlight or sweep a torch across the bonnet at a low angle before you pay. Defects found at handover get fixed on the spot; defects found two weeks later become an argument.

Not telling the vendor about wraps, coatings or resprays

Standard compound on a matte wrap creates a permanent glossy scar; standard cutting pressure on a soft respray burns through; polishing a ceramic-coated car strips the coating you paid for. Surface type determines process, and the vendor can only plan for what they know about.

Booking headlight restoration without UV sealing

Sanding and polishing a hazed lens removes the factory UV coating along with the yellowing. Left bare, polycarbonate re-hazes under Gulf sun within months, sometimes before your next inspection. Confirm a UV sealant or lens clear coat is part of the job, not an optional extra you discover afterwards.

Around you

one thread does it

Ready to book scratch removal?

Two ways in: the app for comparison and tracking, whatsapp if you would rather just talk to someone.

WhatsApp us Get the tamam app

no call centre · no hold music · going rate AED 200–900 · the chat is the booking