the going rate · dubai
ranges are typical · live quotes in chat
tamam covers Marina Quays for car polishing the same way it covers every UAE community: multiple vetted vendors, AED ranges you can see up front, and booking that takes a couple of taps.
one meter · three job sizes
Vendors covering Marina Quays tend to have prior jobs in the area, which matters more than it sounds — tower clearance, gate access and lift bookings are where visits usually lose time.
Demand here is high, so slots move quickly — booking a day ahead usually gets you the window you actually want. 2–5 hours is the usual window for scratch removal; larger properties or added scope push it out.
Light scratches refined away where possible.
This matters because the UAE market uses the word 'polish' loosely. Some vendors quote a 'polish' that is actually a wax or glaze pass — a hand-applied product that fills and hides scratches for two or three washes, then disappears — while a genuine machine polish physically removes the defect. They are different jobs at different prices, and you should know which one you are buying before comparing quotes.
Understand too that clear coat is a finite budget: factory paint tolerates only a handful of proper corrections over a car's life. A good polisher measures thickness before cutting and removes the minimum needed; a bad one grinds at maximum cut every visit until the colour coat strikes through on a door edge. A vendor who mentions paint depth readings unprompted understands the material.
Polishing jobs are specified in stages, and the stage count is what drives both the hours and the price. A single-stage polish uses one all-in-one compound on a medium pad: it removes light swirls and adds noticeable gloss in roughly 2–4 hours on a sedan. It is the right call for a well-kept car that has picked up typical UAE wash-and-dust marring, and in this market it generally lands around AED 200–400 for a sedan.
A two-stage correction is a different level of work: a cutting stage with an aggressive compound to remove deeper swirls and scratches, followed by a refining stage with a fine polish to restore clarity, because heavy cutting itself leaves a faint haze that must be polished away. Budget 4–6 hours for a sedan and more for an SUV, with market pricing typically AED 400–700. Three-stage work adds a further finishing pass for show-level gloss on dark colours — black and deep blue paint reveals every flaw, which is why dark cars often need a stage more than white ones — and can run a full working day at AED 600–900.
Polishing works by levelling a surface until it reflects light uniformly — by creating gloss. That is precisely why it must never touch matte paint or a matte vinyl wrap: matte gets its look from a microscopically textured surface that scatters light, and abrading it creates a permanent glossy patch that cannot be undone short of re-wrapping or repainting the panel. Matte cars need pH-neutral washing, dedicated matte sealants, and immediate attention to bird droppings, since etch marks on matte cannot be polished out later. With wraps increasingly common on UAE roads, telling your vendor the car is wrapped is the first line of the job spec.
The operational takeaway is simple: surface type determines process. Before booking, state plainly whether the car is factory gloss, resprayed, wrapped, filmed or coated. A vendor who does not ask about any of this before quoting a polish is quoting blind.
Dubai's polishing market splits sharply between tower life and villa life. In Marina, JLT and Downtown towers, building management usually restricts what can be done in podium parking — no open water, sometimes no machines after certain hours — so vendors work waterless or rinseless and coordinate access with security in advance. Villa communities from Arabian Ranches to Jumeirah are straightforward driveway jobs. Dubai Municipality takes a dim view of wash water running into street drains, so reputable mobile crews capture or minimise runoff. Demand spikes before Eid and in October, when owners fix a summer's worth of sun and sprinkler damage in the first bearable outdoor month.
tamam checks the trade licence, the insurance and the technician identity for every vendor on the platform, and ratings from previous customers stay visible.
Rather than publishing one rate, tamam shows what multiple verified vendors charge for scratch removal so you can pick the tier that fits the job and the budget.
Free to download, free to browse. You only pay when you book a job.
Shaded podium parking hides holograms and remaining swirls almost perfectly. Insist on seeing the car in direct sunlight or sweep a torch across the bonnet at a low angle before you pay. Defects found at handover get fixed on the spot; defects found two weeks later become an argument.
Clear coat is a budget that runs out. A car that gets aggressively machine-polished every few months will eventually strike through on edges and high points, and the only fix at that point is a respray. Correct properly once, then protect and wash correctly so you do not need to cut again for a year or more.
Standard compound on a matte wrap creates a permanent glossy scar; standard cutting pressure on a soft respray burns through; polishing a ceramic-coated car strips the coating you paid for. Surface type determines process, and the vendor can only plan for what they know about.
For a daily-driven car, a genuine machine polish every 12–18 months is a sensible ceiling, with wax or sealant top-ups every two to three months in between. Clear coat is finite, so polishing more often than the paint needs shortens its life. Garage-kept cars can stretch the interval considerably.
Done correctly, it removes only a few microns of clear coat and leaves the paint healthier-looking and easier to protect. The risk comes from repeated aggressive cutting, rotary work near edges, or polishing paint that is already thin — which is why depth readings before heavy correction matter. Ask your vendor how much cut the job needs and why.
Holograms are wavy ribbons of micro-scratching left by aggressive rotary polishing that was never refined with a finishing pass. They are fully fixable — a proper fine polish on a soft pad removes them. If they appeared a few washes after a 'perfect' polish, the previous job hid them under fillers, and the refining stage you paid for never happened.
Lamp condition and light output are checked at renewal inspection, and badly yellowed or hazed lenses are a common reason cars get flagged. Restoration is a 30–60 minute job for the pair, typically AED 150–300, and is worth doing shortly before your inspection date. Make sure the vendor applies a UV sealant afterwards or the haze returns within months.
Yes, and any coating installer worth hiring will insist on it. The coating locks in whatever is underneath it, swirls included, for years. The standard sequence is decontamination, machine polish to the level of correction you want, a panel wipe to remove polishing oils, then the coating. Skipping correction to save money defeats the point of coating.
Yes — Marina Quays is covered across Dubai, with vendors who regularly work the area. Availability shows live in the app.
Free to download, free to browse. You only pay when you book a job.