Residents across Madinat Zayed book car polishing through tamam because the model is simple — licensed vendors, transparent pricing, in-app tracking, and the same provider again next time if you liked them.
Download the appBook on WhatsAppVendors covering Madinat Zayed tend to have prior jobs in the area, which matters more than it sounds — tower clearance, gate access and lift bookings are where visits usually lose time.
Vendor availability is steady and lead times are typically short. Most scratch removal jobs in this kind of area take around 2–5 hours, though access and scope shift that.
Light scratches refined away where possible.
Rather than publishing one rate, tamam shows what multiple verified vendors charge for scratch removal so you can pick the tier that fits the job and the budget.
As a rough guide for scratch removal: single-stage machine polish, sedan around AED 200–400; single-stage machine polish, suv or 4x4 around AED 300–500; two- to three-stage correction, suv or 4x4 around AED 600–900.
The range narrows to an actual figure once a vendor sees the scope. You approve it before work starts.
The workhorse of modern polishing is the dual-action (DA) machine. Its head spins and oscillates at once, which spreads heat and makes it very hard to burn through paint — the tool most mobile technicians should be running for most jobs. The rotary polisher, spinning on a single fixed axis, cuts much faster and suits heavy correction in experienced hands, but it concentrates heat, bites at edges and creases, and causes most of the horror stories in this trade.
Hand polishing has a role, but a narrow one: working a small etch mark, applying glaze, or finishing spots a machine cannot safely reach around door handles and mirror caps. What it cannot do is genuine correction across a whole car — human arms cannot sustain the consistent pressure needed to level clear coat evenly. A 'full hand polish' at machine-polish money is really a wax-and-fill job, fine only if described and priced as one.
The restoration process is miniature paint correction. The technician masks the surrounding paint, then wet-sands the lens through progressively finer grits — typically 800 to 1500 to 3000 — removing the dead UV layer entirely. At this point the lens looks uniformly frosted, which alarms customers who have not seen the process before. Machine polishing with a plastic-specific compound then brings it back to full clarity. The whole job runs 30–60 minutes for the pair and typically costs AED 150–300 in this market.
The step separating a lasting job from a six-month one is re-sealing. Sanding removed the factory UV protection, so bare polished polycarbonate yellows again fast under Gulf sun. A proper finish applies a UV-resistant sealant or a sprayed lens clear coat — ask specifically what goes on and how long it should hold. The answer tells you whether you are buying a restoration or a temporary shine before your inspection date.
If a wax or sealant was applied at the end of your polish, give it 24–48 hours to cure before the first wash, and keep the car out of sprinkler range — hard water drying on fresh paint in 45-degree heat etches spots with remarkable speed. After a sandstorm, resist the urge to wipe anything: rinse the dust off with free-flowing water first, then wash. A sandstorm's worth of grit under one impatient towel pass can undo a two-stage correction on a bonnet.
Between polishes, the maintenance loop is short: a gentle two-bucket or touchless wash weekly or fortnightly, a sealant top-up every two to three months because UV here eats wax quickly, and shaded parking where possible. Outdoor-parked cars need correction noticeably more often than garage-kept ones, and dark colours show the difference first — a recurring mobile wash from careful hands keeps the finish honest between corrections.
If you would rather not use the app, message tamam on whatsapp and a coordinator will arrange a vetted vendor in Madinat Zayed for you.
Free to download, free to browse. You only pay when you book a job.
Download the appMessage on WhatsAppVendors are licence-checked and insurance-verified before they take a single booking, and customer ratings stay attached to their profile afterwards.
The feather duster at the car park and the dry cloth at the petrol station are the single biggest source of swirl marks on UAE cars. Desert dust is harder than clear coat, and every dry wipe grinds it across the surface. Decline the courtesy wipe, always.
Glazes and filler-heavy waxes hide swirls for two or three washes, then rinse away and leave the paint exactly as it was. Ask directly whether the job is machine correction or a glaze finish. Both are legitimate products at their own price points — the mistake is paying correction money for concealment.
Clear coat is a budget that runs out. A car that gets aggressively machine-polished every few months will eventually strike through on edges and high points, and the only fix at that point is a respray. Correct properly once, then protect and wash correctly so you do not need to cut again for a year or more.
The fingernail test is the honest answer: if your nail catches in the scratch, it has gone through or nearly through the clear coat, and polishing can only soften its appearance, not remove it. Scratches that do not catch a nail usually polish out fully. Anything deeper needs touch-up paint or a respray of the panel.
A single-stage polish on a sedan takes roughly 3–4 hours including the wash and decontamination; a two-stage correction runs 5–7 hours; a three-stage job on an SUV can fill a working day. Quotes promising a full machine polish in under two hours are compressing the preparation stages, and the finish will show it within a few washes.
Holograms are wavy ribbons of micro-scratching left by aggressive rotary polishing that was never refined with a finishing pass. They are fully fixable — a proper fine polish on a soft pad removes them. If they appeared a few washes after a 'perfect' polish, the previous job hid them under fillers, and the refining stage you paid for never happened.
No. Polishing creates gloss by levelling the surface, which permanently ruins the light-scattering texture that makes matte look matte. A glossy patch on a matte panel cannot be reversed without re-wrapping or repainting. Matte finishes need dedicated cleaning and sealant products, so always tell the vendor the car is matte before booking anything.
Yes, and any coating installer worth hiring will insist on it. The coating locks in whatever is underneath it, swirls included, for years. The standard sequence is decontamination, machine polish to the level of correction you want, a panel wipe to remove polishing oils, then the coating. Skipping correction to save money defeats the point of coating.
Yes — Madinat Zayed is covered across Abu Dhabi, with vendors who regularly work the area. Availability shows live in the app.
scratch removal elsewhere in abu dhabi
more car polishing in madinat zayed
other car services in madinat zayed