For anyone arranging car polishing around Al Majaz, tamam removes the two annoying parts — finding someone trustworthy, and finding out the price before they arrive.
Download the appBook on WhatsAppAnyone who has arranged car polishing in Al Majaz knows the friction isn't the work itself — it's coordination. Vendors familiar with the area cut that down considerably.
Vendor availability is steady and lead times are typically short. Typical on-site time is 2–5 hours. Vendors will flag it in advance if your job looks heavier than standard.
Light scratches refined away where possible.
No polishing pad should ever meet a dirty panel. UAE dust is fine crystalline silica — effectively airborne sandpaper — and any grit trapped under a spinning pad will carve fresh scratches faster than the compound can remove old ones. So the job starts with a thorough wash: a pre-rinse or snow foam to lift loose dust, then a two-bucket hand wash with a proper mitt, working top down so the dirtiest water never travels upward.
Washing alone does not remove bonded contamination. Run your fingertips over a 'clean' bonnet inside a thin plastic bag and you will feel grit — industrial fallout, brake dust and overspray fused to the clear coat, which builds fast anywhere near active construction. The technician removes it chemically (an iron remover that turns purple as it dissolves ferrous particles, plus tar remover on the lower panels) and mechanically, with a clay bar or mitt glided over lubricated paint until the surface feels like glass.
Polishing jobs are specified in stages, and the stage count is what drives both the hours and the price. A single-stage polish uses one all-in-one compound on a medium pad: it removes light swirls and adds noticeable gloss in roughly 2–4 hours on a sedan. It is the right call for a well-kept car that has picked up typical UAE wash-and-dust marring, and in this market it generally lands around AED 200–400 for a sedan.
A two-stage correction is a different level of work: a cutting stage with an aggressive compound to remove deeper swirls and scratches, followed by a refining stage with a fine polish to restore clarity, because heavy cutting itself leaves a faint haze that must be polished away. Budget 4–6 hours for a sedan and more for an SUV, with market pricing typically AED 400–700. Three-stage work adds a further finishing pass for show-level gloss on dark colours — black and deep blue paint reveals every flaw, which is why dark cars often need a stage more than white ones — and can run a full working day at AED 600–900.
UAE sunlight destroys headlight lenses. The lenses are polycarbonate with a factory UV coating, and years of intense sun bake that coating into a yellow, hazed crust that scatters light. Beyond looking tired, hazed lenses cut night visibility dramatically and can get flagged at the annual registration renewal test at inspection centres, where lamp condition and light output are checked. It is one of the cheapest failure points to fix in advance.
The step separating a lasting job from a six-month one is re-sealing. Sanding removed the factory UV protection, so bare polished polycarbonate yellows again fast under Gulf sun. A proper finish applies a UV-resistant sealant or a sprayed lens clear coat — ask specifically what goes on and how long it should hold. The answer tells you whether you are buying a restoration or a temporary shine before your inspection date.
You can book scratch removal entirely over whatsapp if that is easier — describe the job, get AED ranges back, confirm.
Trade licences are checked against the issuing municipality, not self-declared, and insurance has to be current for a vendor to stay listed.
Rather than publishing one rate, tamam shows what multiple verified vendors charge for scratch removal so you can pick the tier that fits the job and the budget.
As a rough guide for scratch removal: single-stage machine polish, sedan around AED 200–400; single-stage machine polish, suv or 4x4 around AED 300–500; two-stage paint correction, sedan around AED 400–700.
You will see each vendor's price against your job description, then decide. No commitment until then.
The feather duster at the car park and the dry cloth at the petrol station are the single biggest source of swirl marks on UAE cars. Desert dust is harder than clear coat, and every dry wipe grinds it across the surface. Decline the courtesy wipe, always.
Glazes and filler-heavy waxes hide swirls for two or three washes, then rinse away and leave the paint exactly as it was. Ask directly whether the job is machine correction or a glaze finish. Both are legitimate products at their own price points — the mistake is paying correction money for concealment.
Sanding and polishing a hazed lens removes the factory UV coating along with the yellowing. Left bare, polycarbonate re-hazes under Gulf sun within months, sometimes before your next inspection. Confirm a UV sealant or lens clear coat is part of the job, not an optional extra you discover afterwards.
Done correctly, it removes only a few microns of clear coat and leaves the paint healthier-looking and easier to protect. The risk comes from repeated aggressive cutting, rotary work near edges, or polishing paint that is already thin — which is why depth readings before heavy correction matter. Ask your vendor how much cut the job needs and why.
The fingernail test is the honest answer: if your nail catches in the scratch, it has gone through or nearly through the clear coat, and polishing can only soften its appearance, not remove it. Scratches that do not catch a nail usually polish out fully. Anything deeper needs touch-up paint or a respray of the panel.
No. Polishing creates gloss by levelling the surface, which permanently ruins the light-scattering texture that makes matte look matte. A glossy patch on a matte panel cannot be reversed without re-wrapping or repainting. Matte finishes need dedicated cleaning and sealant products, so always tell the vendor the car is matte before booking anything.
Yes, and any coating installer worth hiring will insist on it. The coating locks in whatever is underneath it, swirls included, for years. The standard sequence is decontamination, machine polish to the level of correction you want, a panel wipe to remove polishing oils, then the coating. Skipping correction to save money defeats the point of coating.
Inspect the car in direct sunlight or with a torch held at a low angle to the bonnet, roof and doors, looking for hologram ribbons and remaining swirls. Check trim for white compound staining, panel gaps for dried polish dust, and edges for any burn marks. Two minutes of inspection at handover prevents most disputes later.
Yes — Al Majaz is covered across Sharjah, with vendors who regularly work the area. Availability shows live in the app.
scratch removal elsewhere in sharjah
more car polishing in al majaz
other car services in al majaz
See who is available in Al Majaz right now, with prices before you commit.
Get the tamam appBook via WhatsApp