pool filter cleaningin mudon views.

In most countries a pool has an opening day and a closing day. In the UAE it never closes, but it does change character completely four or five times a year. From October to April the water sits between roughly 18 and 26 degrees, chemical demand is modest, and a weekly visit is usually enough. From May onwards the water climbs past 30 degrees, chlorine starts disappearing almost as fast as it goes in, and evaporation can pull several millimetres of water out of the pool every day.

The practical consequence is that the same pool needs different service intensity, different chemicals and sometimes different equipment settings depending on the month. The sections below walk through the year in order, because that is how the problems actually arrive.

The shamal is the north-westerly wind that pushes down the Gulf, most intensely in early summer and in shorter winter bursts, and it is the single most predictable cause of green pools in the Emirates. The dust it carries is not inert: it brings phosphates and organic matter that feed algae, and a heavy storm can seed a warm, marginally chlorinated pool so effectively that visible bloom appears within two or three days.

Owners who travel in summer are the classic victims here, because a storm hits, nobody brushes the pool, and the villa is reoccupied three weeks later to opaque green water. If you will be away during peak shamal months, keep the maintenance contract running rather than pausing it; rebooking the same vendor for an extra post-storm visit takes a moment in the tamam app, and the technician who already knows your pump room will move faster than a stranger.

The waterline is where owners judge a pool, but the pump room is where pools are actually won or lost, and it is the part of the visit worth watching once so you know what good looks like. A thorough technician reads the filter pressure gauge before touching anything, because pressure relative to the clean baseline dictates whether a backwash is needed; backwashes when the pressure rises roughly half a bar above baseline; and checks the sight glass runs clear before rinsing and returning to filtration.

Around the pump itself, the checks are for shaft seal weeping (a small drip under the pump that, ignored, becomes a burned-out motor), air in the pump basket lid indicating a suction-side leak, and valve positions after any backwash. Timer settings deserve a glance every visit because power cuts and DEWA or SEWA meter work can silently reset them, leaving a pool circulating four hours a day in July.