paint correctionin living legends.

Polishing jobs are specified in stages, and the stage count is what drives both the hours and the price. A single-stage polish uses one all-in-one compound on a medium pad: it removes light swirls and adds noticeable gloss in roughly 2–4 hours on a sedan. It is the right call for a well-kept car that has picked up typical UAE wash-and-dust marring, and in this market it generally lands around AED 200–400 for a sedan.

A two-stage correction is a different level of work: a cutting stage with an aggressive compound to remove deeper swirls and scratches, followed by a refining stage with a fine polish to restore clarity, because heavy cutting itself leaves a faint haze that must be polished away. Budget 4–6 hours for a sedan and more for an SUV, with market pricing typically AED 400–700. Three-stage work adds a further finishing pass for show-level gloss on dark colours — black and deep blue paint reveals every flaw, which is why dark cars often need a stage more than white ones — and can run a full working day at AED 600–900.

Holograms — also called buffer trails — are the signature defect of rushed rotary work. They look like faint, wavy ribbons of micro-scratching that shimmer and move as your viewing angle changes, usually in fan-shaped arcs matching the operator's arm strokes. They are caused by an aggressive pad and compound that were never refined with a finishing pass, or by a dirty, overloaded pad dragging spent compound across the paint. On silver they are hard to see; on black they are unmissable in direct sun.

The countermeasure is a proper handover inspection. See the car in direct sunlight, or run a phone torch at a low angle across the bonnet, roof and doors — horizontal panels take the most work and show flaws first. Look for hologram ribbons, compound dust in panel gaps, white staining on textured trim, and any burn marks on edges and creases. A confident technician will hand you the inspection light themselves, and if you booked through tamam, checking before the job closes out beats raising it afterwards — same-vendor rebooking gives a good operator every incentive to hand over clean work.

Paint protection film (PPF) and ceramic coatings each change the plan in their own way. Quality PPF has a self-healing top layer that swirls lightly and then recovers with heat, which the summer sun here provides for free; light machine polishing of PPF is possible but uses different products and a gentler touch, and edges must be avoided so the film does not lift. Ceramic-coated cars present the opposite problem: the coating is a sacrificial glass-like layer sitting on top of the clear coat, and polishing removes it entirely. If a coated car has picked up marring, the honest conversation is whether to decontaminate and top up the coating, or to polish off the old coating and reapply — a bigger job that should be quoted as one.

The operational takeaway is simple: surface type determines process. Before booking, state plainly whether the car is factory gloss, resprayed, wrapped, filmed or coated. A vendor who does not ask about any of this before quoting a polish is quoting blind.