tamam connects Mira households and businesses with vetted electrician providers. You see the options, the AED range and the availability, then book directly.
Download the appBook on WhatsAppMira sits within Dubai, and local conditions do influence electrician: access procedures, building rules and seasonal demand all shift how a booking should be planned.
Vendor availability is steady and lead times are typically short. Typical on-site time is 1–3 hours. Vendors will flag it in advance if your job looks heavier than standard.
Ceiling lights, chandeliers and spots fitted safely.
Towers add a layer of process. Most managed buildings in Dubai Marina, JLT, Reem Island or Al Majaz require a work permit for any contractor entering the building, often restricted to weekday daytime hours, sometimes with a requirement that the company carries insurance. For a simple socket swap this is usually waved through at the security desk; for anything involving drilling or wall chasing, the building may want the landlord's no-objection letter first. Ask your building management what they need before the electrician is standing in the lobby.
Because access is the slow part, precision matters more than speed. When you book an electrician through tamam you can compare several verified vendors with their AED price ranges up front, then coordinate the arrival window over WhatsApp so the security desk, the permit and the pro all line up on the same hour rather than the same vague morning.
A competent electrician can audit a one- or two-bedroom flat in a couple of hours: test every socket with a tester, press-test each RCD, check water heater elements for earth leakage before they become the next tenant's mystery trip, tighten DB terminals that loosen with thermal cycling, replace yellowed or cracked switch plates, and label the DB so the next occupant is not flipping breakers at random. In villas, add the garden circuits and the external water heater cupboards, which bake in the sun.
If you manage several units, consistency is worth more than any single cheap visit. Booking through tamam lets you rebook the same vendor across units and tenancy changeovers, so the person who labelled the DB in unit 704 is the one who answers when unit 1102 starts tripping, and the payment and job history sit in the app rather than in a folder of WhatsApp screenshots.
Renters have one extra step: chasing walls or adding circuits alters the landlord's asset, so it needs written permission, and many landlords will only agree to surface trunking that can be removed at handover. Get the agreement on record in the same email chain as the quote and nobody argues about it at move-out.
The load question with the longest shadow is the EV charger. A proper villa wallbox draws as much as several AC units combined, which is why installing one is not a socket job: it needs a load assessment against your existing connection, a dedicated circuit with its own protection, and in most cases an approved contractor working within the utility's EV charging rules. Apartment dwellers face the extra step of building-management approval, since the supply belongs to the tower. Start those conversations when you order the car, not when it arrives.
If you would rather not use the app, message tamam on whatsapp and a coordinator will arrange a vetted vendor in Mira for you.
The honest answer on cost is a range, not a figure. For light installation the typical band is AED 150–600, and you see each vendor's position in it before committing.
| scope | guide price |
|---|---|
| Socket or switch replacement, per point | AED 150–250 |
| New socket point as a spur on an existing circuit | AED 180–350 |
| Light fixture or ceiling fan installation, standard ceiling | AED 150–350 |
What you finally pay depends on the vendor and tier you choose — all of it visible before booking.
Trade licences are checked against the issuing municipality, not self-declared, and insurance has to be current for a vendor to stay listed.
A breaker that keeps dropping is doing its job; the fault is still there. Repeated forced resets stress the breaker and, in worn boards, can overheat the buswork behind it. Reset once after unplugging the circuit's appliances; if it will not hold, stop and book a diagnosis.
The induction hob that needs a dedicated circuit your DB cannot spare, the chandelier your gypsum ceiling cannot carry, the dimmer your LED lamps do not support: all cheaper to discover before purchase. A short survey visit or even photos sent ahead prevents owning hardware you cannot install.
Indoor-grade junction boxes in flowerbeds, unrated extension cords feeding garden lights and balcony sockets without covers all fail the same way: moisture gets in, the RCD starts tripping, and the search for the wet joint costs more than proper IP-rated fittings would have. Outdoors, specification is the economy.
Moisture is getting into an outdoor fitting, balcony socket, external water heater cupboard or garden joint and leaking current to earth, which the RCD correctly detects. It feels random because it follows weather, not usage. An electrician isolates circuits at the DB and tests insulation resistance to find the wet point, then re-terminates it in a properly sealed enclosure.
First check your own DB: if the main isolator or RCD has dropped, reset it once. If the board is fully on but the flat is dead, the fault is likely at the meter or the building's riser, which is the utility's or building management's side. Call the building's maintenance desk or the utility's fault line; a private electrician cannot legally open that part of the installation.
A standard fixture on a normal ceiling takes thirty to sixty minutes; chandeliers with assembly and high ceilings can run to two or three hours. Supplying your own fixture is normal and usually cheaper, just have it on site before the visit and mention ceiling height and material, since concrete slab and gypsum need different fixings.
Emergency fault attendance is generally allowed at any hour, but planned noisy work like drilling is restricted by most building managements to weekday daytime slots, commonly somewhere between 8am and 6pm. Quiet work such as fixture swaps or DB diagnosis is often fine in the evening. Confirm your building's rules before booking a time you cannot use.
Legitimate operators work under a licensed company rather than as anonymous freelancers, and for regulated work they should name their utility approval without being pressed. Booking through tamam adds a layer, since listed vendors are verified and the job, payment and history are recorded in the app, which also makes it easy to rebook the same technician who already knows your board.
Mira is within our Dubai coverage. Open the app to see which vendors have slots near you today.
light installation elsewhere in dubai
more electrician in mira
other home services in mira
Free to download, free to browse. You only pay when you book a job.
Install tamamMessage on WhatsApp