tamam covers Internet City for car polishing the same way it covers every UAE community: multiple vetted vendors, AED ranges you can see up front, and booking that takes a couple of taps.
Download the appBook on WhatsAppVendors covering Internet City tend to have prior jobs in the area, which matters more than it sounds — tower clearance, gate access and lift bookings are where visits usually lose time.
Vendor availability is steady and lead times are typically short. Most headlight restoration jobs in this kind of area take around 2–5 hours, though access and scope shift that.
Yellowed lenses cleared and sealed.
See who is available in Internet City right now, with prices before you commit.
Get the tamam appWhatsApp usYour car's paint is a sandwich: primer, colour coat, and on top a transparent clear coat roughly 40–60 microns thick — half the thickness of a human hair. Almost every visible defect, from swirl marks to light scratches to water etching, lives in that clear coat. Polishing is controlled abrasion: a machine, a pad and a compound remove a few microns until the surface is level and the defects are gone. That is the whole trade; everything else — wash, clay, taping, inspection light — exists to make that abrasion safe and even.
This matters because the UAE market uses the word 'polish' loosely. Some vendors quote a 'polish' that is actually a wax or glaze pass — a hand-applied product that fills and hides scratches for two or three washes, then disappears — while a genuine machine polish physically removes the defect. They are different jobs at different prices, and you should know which one you are buying before comparing quotes.
The restoration process is miniature paint correction. The technician masks the surrounding paint, then wet-sands the lens through progressively finer grits — typically 800 to 1500 to 3000 — removing the dead UV layer entirely. At this point the lens looks uniformly frosted, which alarms customers who have not seen the process before. Machine polishing with a plastic-specific compound then brings it back to full clarity. The whole job runs 30–60 minutes for the pair and typically costs AED 150–300 in this market.
The step separating a lasting job from a six-month one is re-sealing. Sanding removed the factory UV protection, so bare polished polycarbonate yellows again fast under Gulf sun. A proper finish applies a UV-resistant sealant or a sprayed lens clear coat — ask specifically what goes on and how long it should hold. The answer tells you whether you are buying a restoration or a temporary shine before your inspection date.
Comparing polishing quotes on price alone is how people end up paying twice. Two identical quotes can describe completely different jobs: one a genuine single-stage machine polish with full decontamination, the other a quick wash and a filler glaze. To compare like with like, ask each vendor the same short list: how many stages, machine or hand, is claying and iron decontamination included, will you do a test spot, and what protection goes on at the end.
Think about cadence as well as the single job. A sensible rhythm for a daily-driven UAE car is one machine polish every 12–18 months with sealant top-ups every two to three months between, ideally from the same hands. Once a technician's finish survives the two-week filler test, keep them — a polisher who knows your paint history cuts less clear coat each visit, which extends the life of the finish.
If you would rather not use the app, message tamam on whatsapp and a coordinator will arrange a vetted vendor in Internet City for you.
headlight restoration generally falls in the AED 200–900 band. Comparing several verified vendors on the same job description is what stops you overpaying.
As a rough guide for headlight restoration: single-stage machine polish, sedan around AED 200–400; single-stage machine polish, suv or 4x4 around AED 300–500; two-stage paint correction, sedan around AED 400–700.
You will see each vendor's price against your job description, then decide. No commitment until then.
Every vendor on tamam has a verified trade licence with the relevant municipality, checked insurance, and technicians who are ID-tagged in the app.
Shaded podium parking hides holograms and remaining swirls almost perfectly. Insist on seeing the car in direct sunlight or sweep a torch across the bonnet at a low angle before you pay. Defects found at handover get fixed on the spot; defects found two weeks later become an argument.
Clear coat is a budget that runs out. A car that gets aggressively machine-polished every few months will eventually strike through on edges and high points, and the only fix at that point is a respray. Correct properly once, then protect and wash correctly so you do not need to cut again for a year or more.
Standard compound on a matte wrap creates a permanent glossy scar; standard cutting pressure on a soft respray burns through; polishing a ceramic-coated car strips the coating you paid for. Surface type determines process, and the vendor can only plan for what they know about.
Holograms are wavy ribbons of micro-scratching left by aggressive rotary polishing that was never refined with a finishing pass. They are fully fixable — a proper fine polish on a soft pad removes them. If they appeared a few washes after a 'perfect' polish, the previous job hid them under fillers, and the refining stage you paid for never happened.
Lamp condition and light output are checked at renewal inspection, and badly yellowed or hazed lenses are a common reason cars get flagged. Restoration is a 30–60 minute job for the pair, typically AED 150–300, and is worth doing shortly before your inspection date. Make sure the vendor applies a UV sealant afterwards or the haze returns within months.
No. Polishing creates gloss by levelling the surface, which permanently ruins the light-scattering texture that makes matte look matte. A glossy patch on a matte panel cannot be reversed without re-wrapping or repainting. Matte finishes need dedicated cleaning and sealant products, so always tell the vendor the car is matte before booking anything.
Yes, and any coating installer worth hiring will insist on it. The coating locks in whatever is underneath it, swirls included, for years. The standard sequence is decontamination, machine polish to the level of correction you want, a panel wipe to remove polishing oils, then the coating. Skipping correction to save money defeats the point of coating.
Inspect the car in direct sunlight or with a torch held at a low angle to the bonnet, roof and doors, looking for hologram ribbons and remaining swirls. Check trim for white compound staining, panel gaps for dried polish dust, and edges for any burn marks. Two minutes of inspection at handover prevents most disputes later.
Yes — Internet City is covered across Dubai, with vendors who regularly work the area. Availability shows live in the app.
headlight restoration elsewhere in dubai
more car polishing in internet city
other car services in internet city