homehomehandymanthe lakes
home · Dubai

Handyman in The Lakes

Residents across The Lakes book handyman through tamam because the model is simple — licensed vendors, transparent pricing, in-app tracking, and the same provider again next time if you liked them.

Download the app
price band AED 100–500duration 1–3 hourscovers The Lakesemirate Dubai

handyman in The Lakes: how it works

Vendors covering The Lakes tend to have prior jobs in the area, which matters more than it sounds — tower clearance, gate access and lift bookings are where visits usually lose time.

Demand here is high, so slots move quickly — booking a day ahead usually gets you the window you actually want. Most handyman jobs in this kind of area take around 1–3 hours, though access and scope shift that.

Book handyman in The Lakes

See who is available in The Lakes right now, with prices before you commit.

Download the app

Booking, step by step

  1. describe the job in the app or on whatsapp
  2. vendors covering The Lakes respond with AED ranges
  3. select the one that fits
  4. slot confirmed with tracking
  5. same vendor saved for next time

Prefer to talk it through? whatsapp works — send what you need and we will arrange the The Lakes booking on your behalf.

Pricing in The Lakes

Expect AED 100–500 as the working range for handyman in The Lakes. What moves it: job size, access difficulty, materials, and whether you want the value or premium tier.

As a rough guide for handyman: tv mounting up to 65 inches (bracket supplied by customer) around AED 150–350; curtain rail or blind installation, per window around AED 100–250; flat-pack assembly, standard bed or chest of drawers around AED 150–300.

Parts and consumables, where they apply, are quoted separately and approved by you first.

TV mounting: forget the stud finder you saw on YouTube

Most TV-mounting advice online is written for North American timber-frame houses. UAE apartments and villas are built differently: exterior and structural walls are concrete block or poured concrete finished with plaster, while many internal partitions, especially in towers built after roughly 2005, are gypsum board on light-gauge metal studs. A timber stud finder is useless here. The professional method is a knock test first (block sounds dead, gypsum sounds hollow), then a magnet or metal-stud detector to map the studs at their usual 400 or 600 millimetre spacing.

Good workmanship shows in the details you can check yourself: the TV sits level (put a spirit-level app on the top edge), cables run through a trunking channel or in-wall conduit rather than dangling, the mount's locking screws are fitted so the panel cannot be lifted off by a curious child, and the technician does a firm downward pull on the bracket before hanging the screen. Budget 60-90 minutes if cable concealment or a soundbar is involved.

Curtain rails and blinds: the first ten minutes is all measuring

Curtain work is 80 percent measurement and 20 percent drilling, and the mistakes all happen in the first part. The technician has to establish three things before a single hole is made: whether the fixing is face-fix (into the wall above the window), ceiling-fix (up into the slab), or inside the recess; whether the ceiling at that point is actual concrete slab or a suspended gypsum ceiling with a void above it; and how much the finished curtains will weigh. A double track carrying blackout plus sheer across a three-metre villa window is a genuinely heavy, constantly moving load, and it needs brackets every 60-80 centimetres, not just one at each end.

Time budget: a straightforward single rail or roller blind is 30-45 minutes per window; a ceiling-fixed double track with careful levelling runs closer to an hour. The finished check is simple: the rail is dead level (water finds crooked rails instantly, your eye takes a day), gliders run end to end without catching, and the brackets do not flex when you draw the curtain briskly.

Silicone resealing: the ninety-minute job everyone quotes at thirty

Blackened silicone around a shower tray or kitchen sink is probably the most common small job in UAE bathrooms, and it is also the most commonly botched, because the visible part (running a new bead) is the quick part. The job is really a removal job. Every trace of the old sealant has to come out: cut free with a blade, scraped, then the residue dissolved or abraded away, because new silicone will not bond to old silicone and any mould left in the joint grows straight through the fresh bead within months.

Then comes the part no one budgets for: cure time. Sanitary silicone needs roughly 24 hours before the shower runs again; using it the same evening washes out the surface skin and the bead fails early. A full shower enclosure reseal is 60-90 minutes of work plus that day of patience. Quality check a week later: the bead is uniform width, bonded on both edges with no lifting corners, and water sheets off it rather than creeping underneath.

Avoid these

Letting anyone seal over old silicone

New silicone does not bond to old silicone, and mould trapped underneath grows straight through the fresh bead. If the technician is not spending most of the job on removal and drying, the reseal will fail within months. Ask to see the joint clean and dry before the new bead goes in.

Putting a full-motion TV arm into bare plasterboard

An articulating arm multiplies the TV's weight into leverage at a few fixing points, and plastic plugs in gypsum cannot resist it. The mount holds during the demo and fails weeks later. Insist on metal studs, a backing board, or a different wall.

Fixing developer defects at your own cost

Cracked tiles, failed grout and misaligned kitchen units in a new handover are usually the developer's obligation during the defects liability period. Paying a handyman to fix them both costs you money and can undermine the official snag claim. Document and report first; hire for the jobs the developer never owed you.

Handyman in Dubai

Dubai's tower-heavy stock means the building, not the emirate, sets most of the rules. Marina, JLT, Downtown and Business Bay towers commonly require a work permit or NOC from building management before a technician drills anything, plus contractor access through the service lift during set hours, often 9am to 6pm on weekdays only. Factor the permit lead time into your booking, and remember that post-2005 towers are heavy on gypsum partitions, so brief heavy-mounting jobs accordingly. Anything touching electrical circuits or water supply beyond simple fixtures crosses into DEWA and Dubai Municipality licensed-trade territory.

Verified vendors

tamam checks the trade licence, the insurance and the technician identity for every vendor on the platform, and ratings from previous customers stay visible.

Get this right first

  • Write the complete job list, walking room by room, and photograph every job
  • Knock-test the relevant walls (hollow means gypsum or hollow block) and note it in your booking request
  • Check whether your building needs a work permit or NOC, and its noisy-work hours
  • Stop using the shower a few hours before any silicone reseal, and plan 24 hours of cure
  • Agree the full scope and quote in the app before the visit, not at the door

Frequently asked questions

Do handymen bring their own tools and materials?

Tools, yes, always: drills, levels, anchors and consumables like screws and basic plugs are part of the service. Specific hardware is different: TV brackets, curtain rails, mirrors, shelves and replacement hinges are normally customer-supplied unless the quote says otherwise. Confirm the split when you accept the quote so nobody is standing in a hardware store mid-visit.

How long before I can use the shower after silicone resealing?

Roughly 24 hours. Sanitary silicone skins quickly but needs a full day to cure; running the shower the same evening washes out the bead and shortens its life dramatically. Book the reseal for a morning and plan around the guest bathroom that day.

What happens if the job takes longer than quoted?

It depends on whether the scope changed. If you added tasks on the day, expect the price to move, agree the addition before the extra work starts. If the scope is unchanged and the technician simply underestimated, a fixed quote should hold, which is one reason to get quotes against a full photo-documented list rather than a vague description.

Can a handyman fix the snags in my brand-new apartment?

They can, but often should not, yet. Genuine construction defects belong on the developer's snag list inside the defects liability period, usually twelve months, and fixing them privately can weaken your claim. Document defects with the developer first, then use a handyman for everything the developer never owed you: mounting, rails, assembly and the move-in list.

Do handymen work weekends and evenings in the UAE?

Most vendors work Saturdays and many work Sundays, which suits commuting households, but tower rules can override this: plenty of buildings ban drilling on weekends or after 6pm. Quiet jobs, assembly, silicone, door adjustment, are usually fine any day. Check your building's noisy-work hours before booking a weekend slot.

Do you cover The Lakes?

The Lakes is within our Dubai coverage. Open the app to see which vendors have slots near you today.