tamam connects Arabian Gate households and businesses with vetted handyman providers. You see the options, the AED range and the availability, then book directly.
Download the appBook on WhatsAppAnyone who has arranged handyman in Arabian Gate knows the friction isn't the work itself — it's coordination. Vendors familiar with the area cut that down considerably.
Vendor availability is steady and lead times are typically short. Budget roughly 1–3 hours on site for handyman, plus a little for access if the building has a lift protocol.
Licensed vendors, transparent AED ranges, and the same provider again next time if you liked them.
Open in the appMessage on WhatsAppYou are booking a vetted business, not an anonymous number from a listings site: trade licence verified, insurance on file, technicians ID-tagged.
Next comes scope confirmation. The technician restates what will be done, what materials are needed, and whether anything on your list is actually outside a handyman's lane, wiring a new power point, for example, belongs to a licensed electrician under DEWA and municipality rules, and a good handyman says so rather than improvising. Then protection goes down: drop sheets under drilling points, and ideally a vacuum or dust catcher held at the drill hole, because red block dust stains light grout and carpet.
The work itself follows the sequence agreed, and the visit ends with a walkthrough in reverse: every fixing gets a firm pull test, levels go back on the shelves and frames, offcuts and packaging leave with the technician, and you check each item against your original list. Most call-outs in the UAE carry a minimum charge, typically AED 100-200, which usually covers arrival and the first block of labour. That minimum is exactly why batching several small jobs into one visit is the single best money decision in this trade, more on that below.
The surface then has to be genuinely dry, not towel-dry but dry-dry, which in a family bathroom means the shower is out of use for a few hours before the work, worth knowing when you schedule the visit. The pro then masks both sides of the joint with tape, guns a sanitary-grade anti-fungal silicone (not general-purpose acrylic, which is cheaper and fails fast in wet areas), tools the bead smooth in one pass, and pulls the tape while the bead is wet, leaving those crisp straight edges that separate professional work from a DIY afternoon.
Then comes the part no one budgets for: cure time. Sanitary silicone needs roughly 24 hours before the shower runs again; using it the same evening washes out the surface skin and the bead fails early. A full shower enclosure reseal is 60-90 minutes of work plus that day of patience. Quality check a week later: the bead is uniform width, bonded on both edges with no lifting corners, and water sheets off it rather than creeping underneath.
Every job in this guide has an objective pass test, and the time to apply it is while the technician is still in your home. Pull firmly on every bracket, rail and mount, a proper fixing does not move at all, and a professional will do this pull test in front of you without being asked. Sight along rails and frames or ask for the laser to be held up one last time. Open and close every adjusted door at normal speed. Run a finger along silicone lines to check the edges are bonded (gently, and only if the bead has skinned). Count the holes: there should be exactly as many as there are fixings, and any abandoned holes should have been filled before the tools were packed.
Finally, keep the relationship. Handyman work is the most repeat-heavy trade in home services, there is always a next list, and a technician who already knows your wall types and building rules is measurably faster on visit two. If the work passed your walkthrough, rebook the same vendor next time; tamam keeps the vendor attached to your booking history so the same team can come back, and you can coordinate the details over whatsapp rather than re-explaining your building from scratch.
There is no single correct price for handyman — there is a range, and where you land in it depends on scope and which vendor you pick. The app shows you that range up front.
| job | typical range |
|---|---|
| Curtain rail or blind installation, per window | AED 100–250 |
| Flat-pack assembly, standard bed or chest of drawers | AED 150–300 |
| Large wardrobe assembly with anti-tip anchoring | AED 250–500 |
Treat these as guide bands. The vendor you select confirms the exact price in-app before the job begins.
Prefer to talk it through? whatsapp works — send what you need and we will arrange the Arabian Gate booking on your behalf.
Only at fixture level: swapping a light fitting, changing a tap washer, fitting an appliance. New wiring, new power points, anything at the distribution board, or work on supply pipework needs a licensed electrician or plumber under DEWA, SEWA or ADDC and municipality rules. A good handyman will tell you where that line is rather than crossing it.
Yes, if it is fixed correctly. Light frames go on plasterboard anchors, but a heavy mirror needs to land on the metal studs behind the board or use rated cavity fixings across multiple points. If the technician cannot tell you which method they are using and why, pause the drilling.
Roughly 24 hours. Sanitary silicone skins quickly but needs a full day to cure; running the shower the same evening washes out the bead and shortens its life dramatically. Book the reseal for a morning and plan around the guest bathroom that day.
Significantly. The call-out minimum, typically AED 100-200, is charged per visit, so five separate bookings pay that floor five times. A batched list turns the same jobs into one half-day visit around AED 300-500, and vendors quote batched work more keenly because the travel is amortised.
Most vendors work Saturdays and many work Sundays, which suits commuting households, but tower rules can override this: plenty of buildings ban drilling on weekends or after 6pm. Quiet jobs, assembly, silicone, door adjustment, are usually fine any day. Check your building's noisy-work hours before booking a weekend slot.
We cover Arabian Gate and the surrounding Dubai communities. Message on whatsapp if you want a specific time confirmed first.
Every visit carries the call-out minimum, so three single-job bookings can cost more than one half-day visit that clears ten jobs. Keep a running list on your phone and book when it reaches three or four items. Vendors also quote batched work more competitively because their travel time is spread across more billable tasks.
New silicone does not bond to old silicone, and mould trapped underneath grows straight through the fresh bead. If the technician is not spending most of the job on removal and drying, the reseal will fail within months. Ask to see the joint clean and dry before the new bead goes in.
In permit-controlled towers, a technician stopped at security is a wasted visit that you may still be charged for. Five minutes with building management before booking, asking about NOCs, service-lift rules and drilling hours, protects both your slot and your deposit with the building.
handyman elsewhere in dubai
more handyman in arabian gate
other home services in arabian gate