ttamamusually replies in minutes11:28
pinnedprice band AED 100–500duration 1–3 hourscovers Al Twaremirate Dubai
need handyman in al twar — today if possible11:28✓✓
Al Twar sits in Dubai, and handyman here has its own rhythm: access rules, parking, and timing that a vendor who knows the area already understands.11:29
typical ranges vendors quote around al twar —Standard call-out including first hour of labourAED 100–200TV mounting up to 65 inches (bracket supplied by customer)AED 150–350Curtain rail or blind installation, per windowAED 100–25011:30
that works. who actually turns up?11:31✓✓
licensed vendors only — the licence and vendor ID land in this chat before anyone rings your bell.11:32
Cost of handyman
There is no single correct price for handyman — there is a range, and where you land in it depends on scope and which vendor you pick. The app shows you that range up front.
Standard call-out including first hour of labourAED 100–200
TV mounting up to 65 inches (bracket supplied by customer)AED 150–350
Curtain rail or blind installation, per windowAED 100–250
Large wardrobe assembly with anti-tip anchoringAED 250–500
Full shower or bathroom silicone resealAED 200–400
Final pricing comes from the vendor option you pick in the app — you see the quotes before you commit.
Silicone resealing: the ninety-minute job everyone quotes at thirty
Blackened silicone around a shower tray or kitchen sink is probably the most common small job in UAE bathrooms, and it is also the most commonly botched, because the visible part (running a new bead) is the quick part. The job is really a removal job. Every trace of the old sealant has to come out: cut free with a blade, scraped, then the residue dissolved or abraded away, because new silicone will not bond to old silicone and any mould left in the joint grows straight through the fresh bead within months.
The surface then has to be genuinely dry, not towel-dry but dry-dry, which in a family bathroom means the shower is out of use for a few hours before the work, worth knowing when you schedule the visit. The pro then masks both sides of the joint with tape, guns a sanitary-grade anti-fungal silicone (not general-purpose acrylic, which is cheaper and fails fast in wet areas), tools the bead smooth in one pass, and pulls the tape while the bead is wet, leaving those crisp straight edges that separate professional work from a DIY afternoon.
Hanging things on walls: gypsum, solid block and the hollow-block surprise
The surprise is hollow block, common in older and mid-market buildings across the northern emirates and in plenty of Dubai and Sharjah stock from the 1990s and 2000s. The drill punches through the block face into a void, the plug spins uselessly, and an inexperienced installer just moves over ten centimetres and tries again, leaving a trail of holes. The correct answers are longer plugs that grip the far face, umbrella-style cavity fixings, or for heavy mirrors and cabinets, a chemical anchor with a mesh sleeve that mushrooms resin inside the void. This is exactly the kind of judgement you are paying a professional call-out for.
For gallery walls and multi-frame layouts, watch for the laser line. A cross-line laser plus paper templates taped up for approval before drilling turns a two-hour trial-and-error session into forty minutes with zero spare holes. Good finish standard: frames level and aligned to the laser, no cracked plaster around fixing points, and every anchor flush, not proud of the wall.
Avoid these
Booking one small job at a time
Every visit carries the call-out minimum, so three single-job bookings can cost more than one half-day visit that clears ten jobs. Keep a running list on your phone and book when it reaches three or four items. Vendors also quote batched work more competitively because their travel time is spread across more billable tasks.
Letting anyone seal over old silicone
New silicone does not bond to old silicone, and mould trapped underneath grows straight through the fresh bead. If the technician is not spending most of the job on removal and drying, the reseal will fail within months. Ask to see the joint clean and dry before the new bead goes in.
Putting a full-motion TV arm into bare plasterboard
An articulating arm multiplies the TV's weight into leverage at a few fixing points, and plastic plugs in gypsum cannot resist it. The mount holds during the demo and fails weeks later. Insist on metal studs, a backing board, or a different wall.
Frequently asked questions
Can a handyman do electrical or plumbing work?
Only at fixture level: swapping a light fitting, changing a tap washer, fitting an appliance. New wiring, new power points, anything at the distribution board, or work on supply pipework needs a licensed electrician or plumber under DEWA, SEWA or ADDC and municipality rules. A good handyman will tell you where that line is rather than crossing it.
Can I hang a heavy mirror on a gypsum wall?
Yes, if it is fixed correctly. Light frames go on plasterboard anchors, but a heavy mirror needs to land on the metal studs behind the board or use rated cavity fixings across multiple points. If the technician cannot tell you which method they are using and why, pause the drilling.
Is it cheaper to combine several small jobs in one visit?
Significantly. The call-out minimum, typically AED 100-200, is charged per visit, so five separate bookings pay that floor five times. A batched list turns the same jobs into one half-day visit around AED 300-500, and vendors quote batched work more keenly because the travel is amortised.
Can a handyman fix the snags in my brand-new apartment?
They can, but often should not, yet. Genuine construction defects belong on the developer's snag list inside the defects liability period, usually twelve months, and fixing them privately can weaken your claim. Document defects with the developer first, then use a handyman for everything the developer never owed you: mounting, rails, assembly and the move-in list.
Do handymen work weekends and evenings in the UAE?
Most vendors work Saturdays and many work Sundays, which suits commuting households, but tower rules can override this: plenty of buildings ban drilling on weekends or after 6pm. Quiet jobs, assembly, silicone, door adjustment, are usually fine any day. Check your building's noisy-work hours before booking a weekend slot.
Do you cover Al Twar?
We cover Al Twar and the surrounding Dubai communities. Message on whatsapp if you want a specific time confirmed first.