tamam connects Dubai City households and businesses with vetted handyman providers. You see the options, the AED range and the availability, then book directly.
Dubai City is a mix of residential, commercial and hospitality, so vendors here handle home, office and hotel jobs interchangeably, which shapes how handyman jobs run here — vendors who cover the area already know the access routine, the parking situation and the timing that suits residents.
Demand here is high, so slots move quickly — booking a day ahead usually gets you the window you actually want. Most furniture assembly jobs in this kind of area take around 1–3 hours, though access and scope shift that.
Flat-pack builds, wardrobes, beds and office desks assembled properly.
Anyone who arrives at your door came through a check: registered business, current insurance, named technician. That is the baseline, not an upgrade.
Curtain work is 80 percent measurement and 20 percent drilling, and the mistakes all happen in the first part. The technician has to establish three things before a single hole is made: whether the fixing is face-fix (into the wall above the window), ceiling-fix (up into the slab), or inside the recess; whether the ceiling at that point is actual concrete slab or a suspended gypsum ceiling with a void above it; and how much the finished curtains will weigh. A double track carrying blackout plus sheer across a three-metre villa window is a genuinely heavy, constantly moving load, and it needs brackets every 60-80 centimetres, not just one at each end.
Ceiling-fix into a suspended gypsum ceiling is the classic trap. Screws into the board alone will hold for a few weeks of gentle use and then let go, usually at 6am when someone yanks the blackout open. The correct approaches are either longer fixings that pass through the void into the concrete slab above, or rated hollow-ceiling anchors with the load spread across extra brackets. Ask your technician which one they are using; the answer tells you a lot.
Blackened silicone around a shower tray or kitchen sink is probably the most common small job in UAE bathrooms, and it is also the most commonly botched, because the visible part (running a new bead) is the quick part. The job is really a removal job. Every trace of the old sealant has to come out: cut free with a blade, scraped, then the residue dissolved or abraded away, because new silicone will not bond to old silicone and any mould left in the joint grows straight through the fresh bead within months.
The surface then has to be genuinely dry, not towel-dry but dry-dry, which in a family bathroom means the shower is out of use for a few hours before the work, worth knowing when you schedule the visit. The pro then masks both sides of the joint with tape, guns a sanitary-grade anti-fungal silicone (not general-purpose acrylic, which is cheaper and fails fast in wet areas), tools the bead smooth in one pass, and pulls the tape while the bead is wet, leaving those crisp straight edges that separate professional work from a DIY afternoon.
If you have just taken handover of a new apartment or villa, you have two overlapping jobs and they should not be confused. Defects that are the developer's responsibility, cracked tiles, failed grout, misaligned kitchen doors, paint defects, belong on the official snag report inside the defects liability period, typically twelve months from handover in the UAE. Fixing those yourself, or having a handyman fix them, can muddy your claim, so document first: photograph everything, log it with the developer or their facilities company, and let their contractor close what they are obliged to close.
For a full move-in list, a half-day booking (around AED 300-500 in most of the market) is far better value than three separate call-outs, and it is where an organised customer saves real money. Send the full list with photos when you request quotes, vendors on tamam can price a batched visit properly only if they can see the whole scope, and a vague 'a few small jobs' brief reliably produces either an inflated quote or a second visit.
There is no single correct price for furniture assembly — there is a range, and where you land in it depends on scope and which vendor you pick. The app shows you that range up front.
| job | AED range |
|---|---|
| Standard call-out including first hour of labour | AED 100–200 |
| TV mounting up to 65 inches (bracket supplied by customer) | AED 150–350 |
| Large wardrobe assembly with anti-tip anchoring | AED 250–500 |
Treat these as guide bands. The vendor you select confirms the exact price in-app before the job begins.
Everything handled in one place — quotes, booking, payment and tracking.
Install tamamBook via WhatsAppIf you would rather not use the app, message tamam on whatsapp and a coordinator will arrange a vetted vendor in Dubai City for you.
Tools, yes, always: drills, levels, anchors and consumables like screws and basic plugs are part of the service. Specific hardware is different: TV brackets, curtain rails, mirrors, shelves and replacement hinges are normally customer-supplied unless the quote says otherwise. Confirm the split when you accept the quote so nobody is standing in a hardware store mid-visit.
Only at fixture level: swapping a light fitting, changing a tap washer, fitting an appliance. New wiring, new power points, anything at the distribution board, or work on supply pipework needs a licensed electrician or plumber under DEWA, SEWA or ADDC and municipality rules. A good handyman will tell you where that line is rather than crossing it.
Yes, if it is fixed correctly. Light frames go on plasterboard anchors, but a heavy mirror needs to land on the metal studs behind the board or use rated cavity fixings across multiple points. If the technician cannot tell you which method they are using and why, pause the drilling.
In many Dubai and Abu Dhabi towers and masterplanned communities, yes: management requires a work permit or NOC, and often restricts noisy work to set weekday hours. Villas and most older buildings need nothing formal beyond a word with the watchman. Check with your building before booking, because a technician turned away at security still counts as a visit.
They can, but often should not, yet. Genuine construction defects belong on the developer's snag list inside the defects liability period, usually twelve months, and fixing them privately can weaken your claim. Document defects with the developer first, then use a handyman for everything the developer never owed you: mounting, rails, assembly and the move-in list.
Yes — Dubai City is covered across Dubai, with vendors who regularly work the area. Availability shows live in the app.
New silicone does not bond to old silicone, and mould trapped underneath grows straight through the fresh bead. If the technician is not spending most of the job on removal and drying, the reseal will fail within months. Ask to see the joint clean and dry before the new bead goes in.
An articulating arm multiplies the TV's weight into leverage at a few fixing points, and plastic plugs in gypsum cannot resist it. The mount holds during the demo and fails weeks later. Insist on metal studs, a backing board, or a different wall.
The cheapest quote often prices a different job: silicone over silicone, plugs instead of proper anchors, no anti-tip strap on the wardrobe. When quotes differ widely, ask each vendor how they will do the job. The one who mentions wall type, anchors and cure times without prompting is usually the one worth paying.
furniture assembly elsewhere in dubai
more handyman in dubai city
other home services in dubai city
Everything handled in one place — quotes, booking, payment and tracking.
Install tamamBook via WhatsApp