tamam connects Al Majaz households and businesses with vetted electrician providers. You see the options, the AED range and the availability, then book directly.
Download the appBook on WhatsAppVendors covering Al Majaz tend to have prior jobs in the area, which matters more than it sounds — tower clearance, gate access and lift bookings are where visits usually lose time.
Vendor availability is steady and lead times are typically short. Budget roughly 1–3 hours on site for emergency electrician, plus a little for access if the building has a lift protocol.
Power loss and burning smells attended fast.
If you would rather not use the app, message tamam on whatsapp and a coordinator will arrange a vetted vendor in Al Majaz for you.
A single MCB tripping repeatedly means one circuit is overloaded or has a faulty appliance or fixture on it. An RCD tripping means electricity is leaking to earth somewhere, classically through a failing water heater element, a washing machine, or moisture in an outdoor fitting. The whole board going dark while your neighbours still have power usually points to the main incomer or the utility's side of the connection, which is not something any private electrician is allowed to open.
UAE boards have a few local quirks worth knowing before trouble starts. Water heaters usually have their own switches, sometimes on the board and sometimes on the bathroom wall, and each split AC unit typically has a dedicated isolator. Older flats often carry a second small board for the heaters alone. Ten minutes spent flipping breakers one by one and writing what each controls on the board's door turns your next fault call from a vague description into a precise one, and shortens the electrician's paid diagnosis time accordingly.
Power does not follow the tenancy contract automatically. In Dubai you activate a DEWA account against your Ejari; in Abu Dhabi it is ADDC (or AADC in Al Ain) against your Tawtheeq; Sharjah runs through SEWA; and Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah are served by Etihad Water and Electricity. All require a refundable security deposit, higher for villas than flats, and most activations are same-day or next-day once documents are in order.
One more new-arrival trap: the UAE runs on 220–240V with British-style BS 1363 three-pin sockets. Appliances from the UK, Europe or most of Asia are fine with at most a plug change. North American 110V appliances are not; they need a step-down transformer or they will die quickly, sometimes taking the circuit with them. Loose universal adapters carrying heavy loads like kettles or heaters are a genuine fire risk and worth replacing with proper plugs in the first week.
Kitchens deserve real planning because appliance ambitions have outgrown older wiring. An induction hob or a built-in oven typically wants its own dedicated circuit, not a share of the socket ring that already runs the kettle, and older buildings in Deira, Abu Shagara or Al Nuaimiya frequently have DBs with no spare ways to take one. Have an electrician check the board's spare capacity before you buy the appliance, not after it is sitting in the hallway; if the answer is a load increase, you are into approved-contractor and utility territory.
Renters have one extra step: chasing walls or adding circuits alters the landlord's asset, so it needs written permission, and many landlords will only agree to surface trunking that can be removed at handover. Get the agreement on record in the same email chain as the quote and nobody argues about it at move-out.
Trade licences are checked against the issuing municipality, not self-declared, and insurance has to be current for a vendor to stay listed.
Rather than publishing one rate, tamam shows what multiple verified vendors charge for emergency electrician so you can pick the tier that fits the job and the budget.
As a rough guide for emergency electrician: call-out with fault diagnosis (tripping breaker, dead circuit) around AED 150–250; socket or switch replacement, per point around AED 150–250; light fixture or ceiling fan installation, standard ceiling around AED 150–350.
What you finally pay depends on the vendor and tier you choose — all of it visible before booking.
A breaker that keeps dropping is doing its job; the fault is still there. Repeated forced resets stress the breaker and, in worn boards, can overheat the buswork behind it. Reset once after unplugging the circuit's appliances; if it will not hold, stop and book a diagnosis.
The induction hob that needs a dedicated circuit your DB cannot spare, the chandelier your gypsum ceiling cannot carry, the dimmer your LED lamps do not support: all cheaper to discover before purchase. A short survey visit or even photos sent ahead prevents owning hardware you cannot install.
Many managed buildings turn contractors away without a work permit or landlord NOC, and some restrict noisy work to weekday hours. The result is a paid visit that ends in the lobby. One message to building management before you pick a slot avoids the wasted call-out.
First check your own DB: if the main isolator or RCD has dropped, reset it once. If the board is fully on but the flat is dead, the fault is likely at the meter or the building's riser, which is the utility's or building management's side. Call the building's maintenance desk or the utility's fault line; a private electrician cannot legally open that part of the installation.
A standard fixture on a normal ceiling takes thirty to sixty minutes; chandeliers with assembly and high ceilings can run to two or three hours. Supplying your own fixture is normal and usually cheaper, just have it on site before the visit and mention ceiling height and material, since concrete slab and gypsum need different fixings.
Emergency fault attendance is generally allowed at any hour, but planned noisy work like drilling is restricted by most building managements to weekday daytime slots, commonly somewhere between 8am and 6pm. Quiet work such as fixture swaps or DB diagnosis is often fine in the evening. Confirm your building's rules before booking a time you cannot use.
Legitimate operators work under a licensed company rather than as anonymous freelancers, and for regulated work they should name their utility approval without being pressed. Booking through tamam adds a layer, since listed vendors are verified and the job, payment and history are recorded in the app, which also makes it easy to rebook the same technician who already knows your board.
Yes, and it is one of the cheapest safety upgrades available. Many pre-2000s buildings in Deira, Ajman and UAQ still have boards with MCBs only, meaning nothing detects earth leakage from a failing heater or damaged cable. Adding RCD protection is a board-level job, so use a properly licensed electrician and expect a short power shutdown during the work.
Yes — Al Majaz is covered across Sharjah, with vendors who regularly work the area. Availability shows live in the app.
emergency electrician elsewhere in sharjah
more electrician in al majaz
other home services in al majaz
Vendors covering Al Majaz with transparent pricing and live availability.
Get the tamam appArrange on WhatsApp