ttamamusually replies in minutes11:00
pinnedrange AED 150–600time needed 1–3 hoursserving MAG Eyebook via app or whatsapp
need electrician in mag eye — today if possible11:00✓✓
For anyone arranging electrician around MAG Eye, tamam removes the two annoying parts — finding someone trustworthy, and finding out the price before they arrive.11:01
typical ranges vendors quote around mag eye —Call-out with fault diagnosis (tripping breaker, dead circuit)AED 150–250Light fixture or ceiling fan installation, standard ceilingAED 150–350Chandelier installation with assembly, high ceilingAED 350–60011:02
that works. who actually turns up?11:03✓✓
licensed vendors only — the licence and vendor ID land in this chat before anyone rings your bell.11:04
Where a handyman stops and an approved contractor begins
UAE utilities draw a firm line through every home. DEWA, SEWA, ADDC and Etihad WE own and control everything up to and including the meter; nobody you hire may touch it, and a damaged meter seal alone can trigger penalties. Beyond the meter, the rule of thumb is that like-for-like work is handyman territory while anything that changes the installation needs a contractor holding the relevant utility approval: replacing or upgrading the DB itself, adding new circuits, rewiring, increasing the connected load for a bigger AC or an EV charger, or anything the utility must inspect and reconnect.
The boundary matters for more than compliance. Home insurance can walk away from a fire claim traced to unapproved modification of the fixed installation, and villa owners feel it at resale, when a buyer's inspection flags a DB full of undocumented additions. If a vendor quotes you for a load increase or a DB replacement without mentioning utility approval or an inspection step, that is your cue to ask harder questions or find another vendor.
What it costs
There is no single correct price for electrician — there is a range, and where you land in it depends on scope and which vendor you pick. The app shows you that range up front.
Call-out with fault diagnosis (tripping breaker, dead circuit)AED 150–250
Light fixture or ceiling fan installation, standard ceilingAED 150–350
Chandelier installation with assembly, high ceilingAED 350–600
RCD or breaker replacement in the DBAED 200–450
Villa landscape lighting repair visitAED 250–550
Nothing is charged until you have chosen a vendor and seen their number. There are no surprise call-out fees.
Mistakes to avoid
Resetting a tripping breaker over and over without finding the cause
A breaker that keeps dropping is doing its job; the fault is still there. Repeated forced resets stress the breaker and, in worn boards, can overheat the buswork behind it. Reset once after unplugging the circuit's appliances; if it will not hold, stop and book a diagnosis.
Buying the appliance or fixture before checking the ceiling or the board
The induction hob that needs a dedicated circuit your DB cannot spare, the chandelier your gypsum ceiling cannot carry, the dimmer your LED lamps do not support: all cheaper to discover before purchase. A short survey visit or even photos sent ahead prevents owning hardware you cannot install.
Booking tower work without checking permit rules first
Many managed buildings turn contractors away without a work permit or landlord NOC, and some restrict noisy work to weekday hours. The result is a paid visit that ends in the lobby. One message to building management before you pick a slot avoids the wasted call-out.
Frequently asked questions
Can a handyman add a new socket, or does that need DEWA approval?
A socket added as a spur from an existing nearby circuit is handyman-level work and needs no utility involvement, though in a rental you need landlord permission for anything cut into walls. A new circuit from the DB, a board upgrade or an increase in connected load crosses into approved-contractor territory with DEWA, SEWA, ADDC or Etihad WE, depending on your emirate.
Do I have to pay for electrical repairs in my rented apartment?
Check your tenancy contract for a minor-maintenance clause; the common UAE arrangement makes tenants responsible for small repairs up to a stated amount per incident, with the landlord covering wear-and-tear and anything structural. An aging water heater leaking to earth is wear, not misuse, so document faults with photos and dates before agreeing to pay.
Are my 110V appliances from the US safe to use here?
Not directly. The UAE supply is 220–240V, and plugging a 110V appliance in without a step-down transformer will damage it, often immediately. Small dual-voltage electronics like laptop chargers are fine with a plug adapter, but motors, kitchen appliances and anything with a heating element need a correctly rated transformer or, more sensibly, a local replacement.
Can electricians work evenings or weekends in apartment towers?
Emergency fault attendance is generally allowed at any hour, but planned noisy work like drilling is restricted by most building managements to weekday daytime slots, commonly somewhere between 8am and 6pm. Quiet work such as fixture swaps or DB diagnosis is often fine in the evening. Confirm your building's rules before booking a time you cannot use.
How do I know the electrician I am booking is actually qualified?
Legitimate operators work under a licensed company rather than as anonymous freelancers, and for regulated work they should name their utility approval without being pressed. Booking through tamam adds a layer, since listed vendors are verified and the job, payment and history are recorded in the app, which also makes it easy to rebook the same technician who already knows your board.
Do you cover MAG Eye?
We cover MAG Eye and the surrounding Dubai communities. Message on whatsapp if you want a specific time confirmed first.