tamam connects Al Majaz 2 households and businesses with vetted electrician providers. You see the options, the AED range and the availability, then book directly.
Download the appBook on WhatsAppThe character of Al Majaz 2 — primarily residential, so most bookings are villa or apartment work and timing follows family routines — determines what a good electrician visit looks like here, from the equipment brought to the slot that gets chosen.
Vendor availability is steady and lead times are typically short. Typical on-site time is 1–3 hours. Vendors will flag it in advance if your job looks heavier than standard.
You can book electrician entirely over whatsapp if that is easier — describe the job, get AED ranges back, confirm.
In an apartment, three parties share the electrical picture. The utility owns everything up to your meter. The building owns the risers, common-area wiring and the supply into your flat. Everything after your DB is the landlord's asset, and your tenancy contract decides who pays for repairs; the common UAE convention is that minor repairs below a threshold written into the contract fall to the tenant, while anything structural or aging-related is the landlord's problem. Read that clause before you spend anything, and photograph faults so the conversation stays factual.
Towers add a layer of process. Most managed buildings in Dubai Marina, JLT, Reem Island or Al Majaz require a work permit for any contractor entering the building, often restricted to weekday daytime hours, sometimes with a requirement that the company carries insurance. For a simple socket swap this is usually waved through at the security desk; for anything involving drilling or wall chasing, the building may want the landlord's no-objection letter first. Ask your building management what they need before the electrician is standing in the lobby.
The classic villa symptom is an RCD that trips at night or after irrigation runs, because moisture in a corroded outdoor joint leaks current to earth. An electrician traces this by isolating garden zones at the DB and testing insulation resistance rather than guessing, and the fix is usually re-terminating joints in proper enclosures rather than replacing every fitting. Gate motors, water feature pumps and shade-structure fans fail the same way and for the same reasons.
Villas reward a rhythm rather than a reaction. A pre-summer visit in April or May, when technicians are still easy to book, catches the loose terminal or tired RCD before the season of peak load and peak humidity tests it. A post-summer garden check in October picks up whatever the heat and the irrigation season damaged, in time for the outdoor-living months when the landscape lighting actually matters. Two planned visits a year cost less than one emergency call and one blacked-out dinner party.
The gap between tenancies is the only time you have an empty unit, full access and no one to inconvenience, which makes it the cheapest possible moment to deal with electrical wear. Faults found now cost a call-out; the same faults found by an unhappy tenant in month two cost a call-out plus an argument about liability, and unresolved snags are a recurring theme in deposit disputes at the rental committees.
If you manage several units, consistency is worth more than any single cheap visit. Booking through tamam lets you rebook the same vendor across units and tenancy changeovers, so the person who labelled the DB in unit 704 is the one who answers when unit 1102 starts tripping, and the payment and job history sit in the app rather than in a folder of WhatsApp screenshots.
Every technician shows in the app with a name and photo before arrival, and the business behind them has cleared licence and insurance checks.
Rather than publishing one rate, tamam shows what multiple verified vendors charge for electrician so you can pick the tier that fits the job and the budget.
| what | AED range |
|---|---|
| Socket or switch replacement, per point | AED 150–250 |
| New socket point as a spur on an existing circuit | AED 180–350 |
| Light fixture or ceiling fan installation, standard ceiling | AED 150–350 |
Nothing is charged until you have chosen a vendor and seen their number. There are no surprise call-out fees.
Upsizing protection to stop tripping removes the safeguard while leaving the fault. An oversized MCB lets cables run hotter than they are rated for inside walls, and a desensitised RCD stops protecting people from a leaking water heater. Any vendor proposing this as the fix is the wrong vendor.
The induction hob that needs a dedicated circuit your DB cannot spare, the chandelier your gypsum ceiling cannot carry, the dimmer your LED lamps do not support: all cheaper to discover before purchase. A short survey visit or even photos sent ahead prevents owning hardware you cannot install.
Many managed buildings turn contractors away without a work permit or landlord NOC, and some restrict noisy work to weekday hours. The result is a paid visit that ends in the lobby. One message to building management before you pick a slot avoids the wasted call-out.
Check your tenancy contract for a minor-maintenance clause; the common UAE arrangement makes tenants responsible for small repairs up to a stated amount per incident, with the landlord covering wear-and-tear and anything structural. An aging water heater leaking to earth is wear, not misuse, so document faults with photos and dates before agreeing to pay.
Not directly. The UAE supply is 220–240V, and plugging a 110V appliance in without a step-down transformer will damage it, often immediately. Small dual-voltage electronics like laptop chargers are fine with a plug adapter, but motors, kitchen appliances and anything with a heating element need a correctly rated transformer or, more sensibly, a local replacement.
A standard fixture on a normal ceiling takes thirty to sixty minutes; chandeliers with assembly and high ceilings can run to two or three hours. Supplying your own fixture is normal and usually cheaper, just have it on site before the visit and mention ceiling height and material, since concrete slab and gypsum need different fixings.
Legitimate operators work under a licensed company rather than as anonymous freelancers, and for regulated work they should name their utility approval without being pressed. Booking through tamam adds a layer, since listed vendors are verified and the job, payment and history are recorded in the app, which also makes it easy to rebook the same technician who already knows your board.
Yes, and it is one of the cheapest safety upgrades available. Many pre-2000s buildings in Deira, Ajman and UAQ still have boards with MCBs only, meaning nothing detects earth leakage from a failing heater or damaged cable. Adding RCD protection is a board-level job, so use a properly licensed electrician and expect a short power shutdown during the work.
Al Majaz 2 is within our Sharjah coverage. Open the app to see which vendors have slots near you today.
electrician elsewhere in sharjah
more electrician in al majaz 2
other home services in al majaz 2
Free to download, free to browse. You only pay when you book a job.
Get it on your phoneBook on WhatsApp