the feature pages · part 1
TV mounting: forget the stud finder you saw on YouTube
Most TV-mounting advice online is written for North American timber-frame houses. UAE apartments and villas are built differently: exterior and structural walls are concrete block or poured concrete finished with plaster, while many internal partitions, especially in towers built after roughly 2005, are gypsum board on light-gauge metal studs. A timber stud finder is useless here. The professional method is a knock test first (block sounds dead, gypsum sounds hollow), then a magnet or metal-stud detector to map the studs at their usual 400 or 600 millimetre spacing.
Good workmanship shows in the details you can check yourself: the TV sits level (put a spirit-level app on the top edge), cables run through a trunking channel or in-wall conduit rather than dangling, the mount's locking screws are fitted so the panel cannot be lifted off by a curious child, and the technician does a firm downward pull on the bracket before hanging the screen. Budget 60-90 minutes if cable concealment or a soundbar is involved.
the feature pages · part 3
Judging the finished work: the five-minute walkthrough before the van leaves
Then look down. Dust and packaging are part of the job, not your problem after it: block-drilling dust vacuumed rather than swept into grout lines, cardboard and offcuts removed, protective film peeled off new hardware. Take photos of the finished work while everything is fresh, they are useful if anything settles or loosens in the first weeks.
Finally, keep the relationship. Handyman work is the most repeat-heavy trade in home services, there is always a next list, and a technician who already knows your wall types and building rules is measurably faster on visit two. If the work passed your walkthrough, rebook the same vendor next time; tamam keeps the vendor attached to your booking history so the same team can come back, and you can coordinate the details over whatsapp rather than re-explaining your building from scratch.
market prices
What it costs
Rather than publishing one rate, tamam shows what multiple verified vendors charge for door repair so you can pick the tier that fits the job and the budget.
Curtain rail or blind installation, per windowAED 100–250
Large wardrobe assembly with anti-tip anchoringAED 250–500
Full shower or bathroom silicone resealAED 200–400
Door realignment and hinge repair, per doorAED 100–200
the going rateAED 100–500
What you finally pay depends on the vendor and tier you choose — all of it visible before booking.
letters to the editor
Frequently asked questions
letter no. 1
Do handymen bring their own tools and materials?
the desk replies — Tools, yes, always: drills, levels, anchors and consumables like screws and basic plugs are part of the service. Specific hardware is different: TV brackets, curtain rails, mirrors, shelves and replacement hinges are normally customer-supplied unless the quote says otherwise. Confirm the split when you accept the quote so nobody is standing in a hardware store mid-visit.
letter no. 2
Do I need building permission before a handyman can drill?
the desk replies — In many Dubai and Abu Dhabi towers and masterplanned communities, yes: management requires a work permit or NOC, and often restricts noisy work to set weekday hours. Villas and most older buildings need nothing formal beyond a word with the watchman. Check with your building before booking, because a technician turned away at security still counts as a visit.
letter no. 3
Is it cheaper to combine several small jobs in one visit?
the desk replies — Significantly. The call-out minimum, typically AED 100-200, is charged per visit, so five separate bookings pay that floor five times. A batched list turns the same jobs into one half-day visit around AED 300-500, and vendors quote batched work more keenly because the travel is amortised.
letter no. 4
How far ahead should I book?
the desk replies — In Dubai, Sharjah and Abu Dhabi, next-day slots are usually realistic and same-day is possible for simple jobs. In RAK, Fujairah and UAQ, where many teams travel from other emirates, one to two days ahead is safer. Move-in season, September and the weeks around school start, tightens availability everywhere.
letter no. 5
Do handymen work weekends and evenings in the UAE?
the desk replies — Most vendors work Saturdays and many work Sundays, which suits commuting households, but tower rules can override this: plenty of buildings ban drilling on weekends or after 6pm. Quiet jobs, assembly, silicone, door adjustment, are usually fine any day. Check your building's noisy-work hours before booking a weekend slot.
letter no. 6
Do you cover Act One Act Two?
the desk replies — We cover Act One Act Two and the surrounding Dubai communities. Message on whatsapp if you want a specific time confirmed first.
corrections
Mistakes to avoid
Booking one small job at a time
Every visit carries the call-out minimum, so three single-job bookings can cost more than one half-day visit that clears ten jobs. Keep a running list on your phone and book when it reaches three or four items. Vendors also quote batched work more competitively because their travel time is spread across more billable tasks.
Skipping the building permit and losing the slot
In permit-controlled towers, a technician stopped at security is a wasted visit that you may still be charged for. Five minutes with building management before booking, asking about NOCs, service-lift rules and drilling hours, protects both your slot and your deposit with the building.
Fixing developer defects at your own cost
Cracked tiles, failed grout and misaligned kitchen units in a new handover are usually the developer's obligation during the defects liability period. Paying a handyman to fix them both costs you money and can undermine the official snag claim. Document and report first; hire for the jobs the developer never owed you.