homehomehandymantown square

Curtain Installation in Town Square

Arranging handyman in Town Square through tamam takes minutes: set the address, compare vendors and their AED ranges, choose the slot, pay in-app.

Download the app
price band AED 100–500duration 1–3 hourscovers Town Squareemirate Dubai

curtain installation across Town Square

In Town Square, the difference between a smooth handyman visit and a wasted afternoon usually comes down to whether the vendor has worked the area before.

Vendor availability is steady and lead times are typically short. Typical on-site time is 1–3 hours. Vendors will flag it in advance if your job looks heavier than standard.

Rails and tracks drilled level, blackout and sheer layers hung.

Arrange curtain installation in Town Square

Licensed vendors, transparent AED ranges, and the same provider again next time if you liked them.

Download the app

From request to done

  1. pick the job type
  2. drop your Town Square location and preferred day
  3. scan the AED ranges side by side
  4. book the slot that works
  5. follow arrival live

Not everything fits neatly into an app form. For anything custom in Town Square, whatsapp a coordinator and it gets handled manually.

What you should expect to pay

curtain installation generally falls in the AED 100–500 band. Comparing several verified vendors on the same job description is what stops you overpaying.

serviceguide price
Standard call-out including first hour of labourAED 100–200
TV mounting up to 65 inches (bracket supplied by customer)AED 150–350
Curtain rail or blind installation, per windowAED 100–250

Treat these as guide bands. The vendor you select confirms the exact price in-app before the job begins.

TV mounting: forget the stud finder you saw on YouTube

On block or concrete, the job is straightforward: a hammer drill with a 6 or 8 millimetre masonry bit, nylon plugs matched to the screw, and the bracket pulls up rock solid. Expect 45-60 minutes for a fixed or tilting mount up to 65 inches, including unboxing, levelling and cable tidy-up. On gypsum, the calculus changes. A fixed mount for a mid-size TV can go onto heavy-duty toggle anchors spread across the plate, but a full-motion articulating arm concentrates leverage onto a few fixing points, and on gypsum that demands hitting at least two metal studs or, better, fitting a plywood backing board first. A technician who proposes screwing a swing arm straight into plasterboard with plastic plugs is telling you they have not done this long.

Good workmanship shows in the details you can check yourself: the TV sits level (put a spirit-level app on the top edge), cables run through a trunking channel or in-wall conduit rather than dangling, the mount's locking screws are fitted so the panel cannot be lifted off by a curious child, and the technician does a firm downward pull on the bracket before hanging the screen. Budget 60-90 minutes if cable concealment or a soundbar is involved.

Silicone resealing: the ninety-minute job everyone quotes at thirty

Blackened silicone around a shower tray or kitchen sink is probably the most common small job in UAE bathrooms, and it is also the most commonly botched, because the visible part (running a new bead) is the quick part. The job is really a removal job. Every trace of the old sealant has to come out: cut free with a blade, scraped, then the residue dissolved or abraded away, because new silicone will not bond to old silicone and any mould left in the joint grows straight through the fresh bead within months.

Then comes the part no one budgets for: cure time. Sanitary silicone needs roughly 24 hours before the shower runs again; using it the same evening washes out the surface skin and the bead fails early. A full shower enclosure reseal is 60-90 minutes of work plus that day of patience. Quality check a week later: the bead is uniform width, bonded on both edges with no lifting corners, and water sheets off it rather than creeping underneath.

The kit in the van: what a properly equipped handyman carries

You can read a technician's standards from their kit before they touch a wall. The baseline for UAE work is a cordless hammer drill with masonry, wood and metal bits; a drill-driver with a clutch for flat-pack work; a cross-line laser and a traditional spirit level; a metal-stud detector and a strong magnet; and an anchor box that covers the local reality, nylon plugs in several sizes, plasterboard self-drives, toggles, cavity fixings and at least a few chemical-anchor options for hollow block.

The finishing and protection layer matters just as much: drop sheets, masking tape, a handheld vacuum or dust-catch attachment, sanitary silicone with a proper gun and tooling kit, hardwood dowels and wood glue for stripped hinges, and a step platform or ladder rated for ceiling work. What the technician usually does not carry is your specific hardware: TV brackets, curtain rails, mirrors and shelves are normally customer-supplied unless you agree otherwise in the quote, so confirm who buys what before the visit, not at your doorstep.

Mistakes to avoid

Booking one small job at a time

Every visit carries the call-out minimum, so three single-job bookings can cost more than one half-day visit that clears ten jobs. Keep a running list on your phone and book when it reaches three or four items. Vendors also quote batched work more competitively because their travel time is spread across more billable tasks.

Skipping the building permit and losing the slot

In permit-controlled towers, a technician stopped at security is a wasted visit that you may still be charged for. Five minutes with building management before booking, asking about NOCs, service-lift rules and drilling hours, protects both your slot and your deposit with the building.

Fixing developer defects at your own cost

Cracked tiles, failed grout and misaligned kitchen units in a new handover are usually the developer's obligation during the defects liability period. Paying a handyman to fix them both costs you money and can undermine the official snag claim. Document and report first; hire for the jobs the developer never owed you.

Curtain Installation in Dubai

Dubai's tower-heavy stock means the building, not the emirate, sets most of the rules. Marina, JLT, Downtown and Business Bay towers commonly require a work permit or NOC from building management before a technician drills anything, plus contractor access through the service lift during set hours, often 9am to 6pm on weekdays only. Factor the permit lead time into your booking, and remember that post-2005 towers are heavy on gypsum partitions, so brief heavy-mounting jobs accordingly. Anything touching electrical circuits or water supply beyond simple fixtures crosses into DEWA and Dubai Municipality licensed-trade territory.

How vendors are checked

Vendors who let their licence or insurance lapse come off the platform. Staying listed requires keeping both current.

A quick checklist

  • Knock-test the relevant walls (hollow means gypsum or hollow block) and note it in your booking request
  • Confirm who supplies hardware: brackets, rails, mirrors, hinges, silicone
  • Stop using the shower a few hours before any silicone reseal, and plan 24 hours of cure
  • Agree the full scope and quote in the app before the visit, not at the door
  • Photograph the finished work and rebook the same vendor if it passed

Frequently asked questions

Do I need building permission before a handyman can drill?

In many Dubai and Abu Dhabi towers and masterplanned communities, yes: management requires a work permit or NOC, and often restricts noisy work to set weekday hours. Villas and most older buildings need nothing formal beyond a word with the watchman. Check with your building before booking, because a technician turned away at security still counts as a visit.

Is it cheaper to combine several small jobs in one visit?

Significantly. The call-out minimum, typically AED 100-200, is charged per visit, so five separate bookings pay that floor five times. A batched list turns the same jobs into one half-day visit around AED 300-500, and vendors quote batched work more keenly because the travel is amortised.

How far ahead should I book?

In Dubai, Sharjah and Abu Dhabi, next-day slots are usually realistic and same-day is possible for simple jobs. In RAK, Fujairah and UAQ, where many teams travel from other emirates, one to two days ahead is safer. Move-in season, September and the weeks around school start, tightens availability everywhere.

What happens if the job takes longer than quoted?

It depends on whether the scope changed. If you added tasks on the day, expect the price to move, agree the addition before the extra work starts. If the scope is unchanged and the technician simply underestimated, a fixed quote should hold, which is one reason to get quotes against a full photo-documented list rather than a vague description.

Can a handyman fix the snags in my brand-new apartment?

They can, but often should not, yet. Genuine construction defects belong on the developer's snag list inside the defects liability period, usually twelve months, and fixing them privately can weaken your claim. Document defects with the developer first, then use a handyman for everything the developer never owed you: mounting, rails, assembly and the move-in list.

Do you cover Town Square?

Yes — Town Square is covered across Dubai, with vendors who regularly work the area. Availability shows live in the app.