ttamamusually replies in minutes11:35
pinnedprice band AED 300–2500duration 3–8 hourscovers Al Majaz 1emirate Sharjah
need ceramic coating in al majaz 1 — today if possible11:35✓✓
Residents across Al Majaz 1 book car detailing through tamam because the model is simple — licensed vendors, transparent pricing, in-app tracking, and the same provider again next time if you liked them.11:36
typical ranges vendors quote around al majaz 1 —Full interior and exterior detail (no machine polish)AED 300–700Single-stage machine polish / gloss enhancementAED 500–1,000Ceramic coating including prep and correctionAED 1,000–2,50011:37
that works. who actually turns up?11:38✓✓
licensed vendors only — the licence and vendor ID land in this chat before anyone rings your bell.11:39
PPF: physical armour for E311 stone chips
If coatings are sunscreen, paint protection film is body armour. PPF is a thermoplastic urethane film around 150–200 microns thick — several times thicker than the entire clearcoat — applied over the paint. Its job is to absorb the impacts that no coating can: the gravel kicked up by trucks on the E311 and E611, the sand-blasting effect of driving through a shamal at 120 km/h, the scuffs of tight parking garages. Quality films are self-healing, meaning light scratches in the film flow back flat with heat, which the UAE supplies free of charge.
Coverage is where quotes diverge. A partial-front kit — front bumper, headlights, and the leading third of the bonnet and wings — targets the zones that collect most of the chip damage and is the rational choice for most highway commuters. Full-front and full-body coverage exist for new and high-value cars, priced well above the typical detailing bracket. The failure modes to ask about are edge lifting and yellowing: cheap films yellow under UV within a couple of years, and poor installation shows as visible seams, stretched patterns and dirt trapped under edges. Ask whether edges are wrapped around the panel or trimmed on the paint, and what the film warranty actually covers in writing.
Interiors at 80 degrees: leather, plastics and the slow bake
Two cautions from the failure-mode file. First, silicone-heavy dressings — the ones that leave a wet glossy shine — feel like protection but attract dust, can make steering wheels dangerously slick, and in the heat they outgas and contribute to the oily film on the inside of your windscreen. Matte-finish, water-based protectants are the professional choice. Second, perforated and ventilated seats, common in UAE-spec cars, cannot be soaked; a good detailer uses controlled moisture and extraction rather than flooding foam into the perforations where it sits and sours.
Steam deserves a mention because it solves a local problem: sanitising fabric, headliners and AC vents without soaking them. In humid coastal months, a saturated seat cushion in a closed car is a mould culture waiting to happen. Steam cleans at high temperature with minimal water, dries fast, and handles the AC vent grilles where the musty smell in older cars usually lives.
AED ranges
Rather than publishing one rate, tamam shows what multiple verified vendors charge for ceramic coating so you can pick the tier that fits the job and the budget.
Full interior and exterior detail (no machine polish)AED 300–700
Single-stage machine polish / gloss enhancementAED 500–1,000
Ceramic coating including prep and correctionAED 1,000–2,500
Interior deep clean with leather treatmentAED 300–800
Headlight restoration (pair)AED 200–500
You will see each vendor's price against your job description, then decide. No commitment until then.
Frequently asked questions
How long does a ceramic coating really last in the UAE?
Realistically two to five years for a professionally applied coating, depending on the product, the quality of prep underneath it, and whether the car gets regular pH-neutral washes. Claims of seven to ten years come from milder climates and lab conditions. The first sign of a dying coating is water no longer beading or sheeting off cleanly.
Can a full detail be done in my tower's basement parking?
Usually yes, with adjustments. Most crews switch to steam and low-water methods where building rules prohibit runoff, and basements actually help by providing shade and stable temperatures. You will normally need to notify security, and some Dubai towers require a permit-to-work notice from the vendor, so confirm access requirements when booking.
Will cleaning the engine bay damage the electronics?
Done properly, no — done with an open pressure washer, possibly. The professional method covers the battery, alternator, fuse box and air intake, uses degreaser with brushes and only low-pressure water or steam, and works on a cool engine. Water forced into connectors can cause misfires that appear days later, which is why method matters more than products here.
Should I coat the car if it already has scratches?
Correct first, then coat. A ceramic coating is transparent and locks in whatever is under it, so coating over swirls preserves them under a hard layer that is tedious to polish through later. This is why reputable coating packages include at least a single-stage polish, and why suspiciously cheap coating offers usually skip it.
Does a detail help resale value even on an older car?
On presentation-driven platforms, clearly yes: listings with glossy, well-shot paint and a clean, neutral-smelling interior generate more viewings and stronger opening offers. Spend proportionately — a full detail with a single-stage polish suits an older daily driver, while a full correction and coating rarely repays itself on a car near the end of its value curve.
Do you cover Al Majaz 1?
Yes — Al Majaz 1 is covered across Sharjah, with vendors who regularly work the area. Availability shows live in the app.
What goes wrong
Buying a ceramic coating without paint correction underneath
A coating is transparent and permanent enough to be annoying: it seals in every swirl and etch mark beneath it. The suspiciously cheap coating deals almost always skip decontamination and polishing, which is precisely where the labour cost lives. Pay for the prep or skip the coating.
Judging vendors on the handover shine
Fresh dressing and a wet-look finish flatter any job for 48 hours. The real quality indicators are process questions asked before booking — wash sequence, decontamination steps, depth-gauge use — and how the paint looks under an inspection lamp at handover. Comparing two or three scoped quotes rather than one glossy promise is the cheapest quality control available.
Polishing too often
Every machine polish removes clearcoat, and clearcoat is a finite budget of roughly 40–60 microns for the car's whole life. Cars that get 'a quick buff' at every service end up with thin, UV-vulnerable paint within a few years. Protect more, polish less: correction should be an occasional reset, not routine maintenance.