why coils ice up in august
A frozen indoor coil looks like the unit is cooling too well. It is the opposite. The evaporator coil is designed to run cold but above 0°C, kept there by steady warm airflow across its fins. Restrict that airflow — a clogged filter, a dust-caked blower wheel — and the coil drops below freezing. Condensate that should drip into the pan freezes onto the fins, ice blocks more airflow, the coil gets colder still, and it snowballs until the unit blows a weak trickle of warmish air. Low refrigerant causes the same ice from the other direction: less gas means lower evaporator pressure and a colder coil. Two very different causes, two very different bills — a AED 150–300 clean, or a leak repair and regas — so a technician who quotes gas without checking the filter first is guessing at your expense.
August is peak icing season because the problems compound: humidity is at its annual maximum, filters carry three months of summer dust, and units run nearly 24 hours a day, so a marginal fault never gets a rest cycle to thaw. If you find ice, switch to fan-only mode for a few hours to melt it gently, put towels down, and do not chip at the fins — they are soft aluminium. Then book a proper diagnosis, because the ice returns within days if the cause is not found.